Atmel ATmega328P Xplained Mini MEGA328P-XMINI MEGA328P-XMINI Data Sheet
Product codes
MEGA328P-XMINI
132
ATmega48A/PA/88A/PA/168A/PA/328/P [DATASHEET]
Atmel-8271H-AVR- ATmega-Datasheet_08/2014
16.11 Register Description
16.11.1 TCCR1A – Timer/Counter1 Control Register A
• Bit 7:6 – COM1A1:0: Compare Output Mode for Channel A
• Bit 5:4 – COM1B1:0: Compare Output Mode for Channel B
The COM1A1:0 and COM1B1:0 control the Output Compare pins (OC1A and OC1B respectively) behavior. If
one or both of the COM1A1:0 bits are written to one, the OC1A output overrides the normal port functionality of
the I/O pin it is connected to. If one or both of the COM1B1:0 bit are written to one, the OC1B output overrides
the normal port functionality of the I/O pin it is connected to. However, note that the Data Direction Register
(DDR) bit corresponding to the OC1A or OC1B pin must be set in order to enable the output driver.
one or both of the COM1A1:0 bits are written to one, the OC1A output overrides the normal port functionality of
the I/O pin it is connected to. If one or both of the COM1B1:0 bit are written to one, the OC1B output overrides
the normal port functionality of the I/O pin it is connected to. However, note that the Data Direction Register
(DDR) bit corresponding to the OC1A or OC1B pin must be set in order to enable the output driver.
When the OC1A or OC1B is connected to the pin, the function of the COM1x1:0 bits is dependent of the
WGM13:0 bits setting.
WGM13:0 bits setting.
shows the COM1x1:0 bit functionality when the WGM13:0 bits are set to a
Normal or a CTC mode (non-PWM).
shows the COM1x1:0 bit functionality when the WGM13:0 bits are set to the fast PWM mode.
Note:
1.
A special case occurs when OCR1A/OCR1B equals TOP and COM1A1/COM1B1 is set. In this case the
compare match is ignored, but the set or clear is done at BOTTOM. See
compare match is ignored, but the set or clear is done at BOTTOM. See
for
more details.
Bit
7
6
5
4
3
2
1
0
COM1A1
COM1A0
COM1B1
COM1B0
–
–
WGM11
WGM10
TCCR1A
Read/Write
R/W
R/W
R/W
R/W
R
R
R/W
R/W
Initial Value
0
0
0
0
0
0
0
0
Table 16-1.
Compare Output Mode, non-PWM
COM1A1/COM1B1
COM1A0/COM1B0
Description
0
0
Normal port operation, OC1A/OC1B disconnected.
0
1
Toggle OC1A/OC1B on Compare Match.
1
0
Clear OC1A/OC1B on Compare Match (Set output to
low level).
low level).
1
1
Set OC1A/OC1B on Compare Match (Set output to
high level).
high level).
Table 16-2.
Compare Output Mode, Fast PWM
COM1A1/COM1B1
COM1A0/COM1B0
Description
0
0
Normal port operation, OC1A/OC1B disconnected.
0
1
WGM13:0 = 14 or 15: Toggle OC1A on Compare
Match, OC1B disconnected (normal port operation).
For all other WGM1 settings, normal port operation,
OC1A/OC1B disconnected.
Match, OC1B disconnected (normal port operation).
For all other WGM1 settings, normal port operation,
OC1A/OC1B disconnected.
1
0
Clear OC1A/OC1B on Compare Match, set
OC1A/OC1B at BOTTOM (non-inverting mode)
OC1A/OC1B at BOTTOM (non-inverting mode)
1
1
Set OC1A/OC1B on Compare Match, clear
OC1A/OC1B at BOTTOM (inverting mode)
OC1A/OC1B at BOTTOM (inverting mode)