STMicroelectronics Class G headphone amplifier based on TS4621E STEVAL-CCA025V1 STEVAL-CCA025V1 Data Sheet
Product codes
STEVAL-CCA025V1
Data brief
For further information contact your local STMicroelectronics sales office.
September 2011
Doc ID 17667 Rev 2
1/4
4
STEVAL-CCA025V1
Class G capless headphone amplifier
demonstration board based on the TS4621E
Features
■
Power supply range: 2.3 V to 4.8 V
■
0.6 mA/channel quiescent current
■
2.1 mA current consumption with 100
µW/channel (10 dB crest factor)
µW/channel (10 dB crest factor)
■
0.006% typical THD+N at 1 kHz
■
100 dB typical PSRR at 217 Hz
■
Zero pop and click
■
I
2
C interface for volume control
■
Digital volume control range: -60 dB to +4 dB
■
100 dB of SNR A-weighted at G = 0 dB
■
Independent right and left channel enable
control
control
■
Integrated high-efficiency buck converter
■
Low standby current: 5 µA max
■
No output coupling capacitors (thanks to the
internal negative supply)
internal negative supply)
■
Thermal shutdown and short-circuit protection
■
RoHS compliant
Description
The STEVAL-CCA025V1 demonstration board is
designed to aid in the evaluation of the TS4621E
audio differential input stereo headphone
amplifier. The TS4621E device is soldered on a
four-layer PCB. An on-board RS-232 to I
designed to aid in the evaluation of the TS4621E
audio differential input stereo headphone
amplifier. The TS4621E device is soldered on a
four-layer PCB. An on-board RS-232 to I
2
C
interface renders the board easy to control from a
personal computer through a serial port.
personal computer through a serial port.
The software provided with the board controls all
features of the TS4621E, such as gain, mode,
mute, standby and register status.
features of the TS4621E, such as gain, mode,
mute, standby and register status.
You can also use the connectors on the
demonstration board to directly control the
features through another I
demonstration board to directly control the
features through another I
2
C interface.
STEVAL-CCA025V1