STMicroelectronics 70 W electronic ballast for metal halide lamp (HID) based on the L6382D5 and ST7FLITE49K2 STEVAL-ILH0 STEVAL-ILH004V1 Data Sheet
Product codes
STEVAL-ILH004V1
Data brief
For further information contact your local STMicroelectronics sales office.
October 2011
Doc ID 022333 Rev 1
1/6
6
STEVAL-ILH004V1
70 W electronic ballast for metal halide lamp (HID)
based on the L6382D5 and ST7FLITE49K2
Features
■
Minimum mains voltage (rms value): 85 V
■
Maximum mains voltage (rms value) : 265 V
■
Minimum mains frequency( fmin): 47 Hz
■
Expected bridge efficiency (H-bridge): 95%
■
Rated lamp power (Plamp) : 70 W
■
Rated output power: 73 W
■
Output current: 0.18 A
■
Regulated DC output voltage (V
out
): 410 V
■
Maximum output low-frequency V
out
ripple:
20 V
■
PFC minimum switching frequency: 30 kHz
■
Expected PFC efficiency 96 %
■
Expected input section efficiency: 99%
■
Expected power factor: 0.99
■
RoHS compliant
Description
The STEVAL-ILH004V1 demonstration board
implements a digital ballast for a 70 W HID lamp
(sodium or metal halide) used in general lighting
applications. The ballast is composed of a boost
converter (power factor controller PFC) working in
transition mode and an inverter composed of a
half-bridge that drive the lamp in low-frequency
square wave.
implements a digital ballast for a 70 W HID lamp
(sodium or metal halide) used in general lighting
applications. The ballast is composed of a boost
converter (power factor controller PFC) working in
transition mode and an inverter composed of a
half-bridge that drive the lamp in low-frequency
square wave.
Both the half-bridge and the PFC stage are
managed by the ST7LITE49K2 that controls the
L6382D5, activating all the power switches.
managed by the ST7LITE49K2 that controls the
L6382D5, activating all the power switches.
STEVAL-ILH004V1