STMicroelectronics Evaluation board for STM32F100 (512KB Flash) Value Line MCUs STM32100E-EVAL STM32100E-EVAL Data Sheet
Product codes
STM32100E-EVAL
Data brief
For further information contact your local STMicroelectronics sales office.
March 2011
Doc ID 018496 Rev 1
1/3
3
STM32100E-EVAL
STM32100E-EVAL evaluation board
Features
■
Three 5V power supply options:
– Power jack
– ST-LINK/V2 connector
– Daughterboard
■
Boot from user Flash, system memory or
SRAM
SRAM
■
1 Gbyte (or more) MicroSD card
■
16 Mbytes of serial Flash memory
■
2 Mbytes of SRAM
■
64 Kbits of EEPROM
■
Embedded ST-LINK/V2 debugger and
programmer
programmer
■
I
2
C/SMBus compatible serial interface
temperature sensor
■
2-channel RS-232 communication interface
with RTS/CTS handshake support on one
channel
with RTS/CTS handshake support on one
channel
■
1-channel RS-485 communication interface
sharing the USART1 connector
sharing the USART1 connector
■
Extension connector for daughterboard or
wrapping board
wrapping board
■
IrDA transceiver
■
IR receiver
■
Inductor motor control connector
■
HDMI with CEC connection
■
JTAG and SWD debug support
■
3.2" TFT color LCD with touch screen
■
Joystick with 4-direction control and selector
■
Reset, wakeup, tamper and user buttons
■
4 LEDs
■
Speaker
■
RTC with backup battery
■
HDMI with CEC connection
Description
The STM32100E-EVAL evaluation board is
designed as a complete development platform for
the STMicroelectronics ARM
designed as a complete development platform for
the STMicroelectronics ARM
®
Cortex-M3 core-
based STM32F100 microcontroller.
A full range of hardware features helps you
evaluate all peripherals (HDMI CEC, SRAM,
motor control, LCD, MicroSD card, Serial Flash,
EEPROM, temperature sensor, speaker, IrDA,
RS-232 and RS-485 interfaces) and develop your
own applications.
evaluate all peripherals (HDMI CEC, SRAM,
motor control, LCD, MicroSD card, Serial Flash,
EEPROM, temperature sensor, speaker, IrDA,
RS-232 and RS-485 interfaces) and develop your
own applications.
Extension headers facilitate the connection of a
daughterboard or wrapping board for your specific
application.
daughterboard or wrapping board for your specific
application.
The in-circuit ST-LINK/V2 tool can be easily used
for JTAG and SWD interface debugging and
programming.
for JTAG and SWD interface debugging and
programming.