Reely Brushed 1:10 RC model car Electric Truggy QCO10E4W096EV61R01 User Manual





• This vehicle is only suitable for use with NiMH drive batteries with 6 cells (rated voltage 7.2 V).

• No rechargeable drive battery is included in the delivery. It must be ordered separately. This enables you to choose

whether you want to use a low-cost beginner’s battery or a high-quality professional battery with a high capacity.

• The drive battery is delivered uncharged and must be charged. Several complete discharge and charge cycles are

necessary before the drive battery delivers its maximum power.

• High-quality drive batteries not only have a higher capacity, which allows you to drive your model vehicle much

longer, but also deliver a higher output voltage under load. This gives the motor more power and results in better
acceleration and higher speed.

• If you are using several drive batteries or rechargeable batteries, purchasing a high-quality charger may be worthwhile.

Such a charger usually has a quick-charging feature.

• Rechargeable batteries heat up when charged or discharged (driving the vehicle). Wait until the rechargeable batteries

have reached room temperature before charging them. The same applies after the charging procedure. Do not use
the rechargeable battery in the vehicle until it has cooled down sufficiently after charging.

• Only use a charger suitable for the battery type used.

• Remove the drive battery from the vehicle for charging.

The included transmitter may not have a charging socket; observe the included operating instructions for
the transmitter. In this case, remove the inserted batteries and charge them externally.

If your transmitter has a charging socket, check whether there are actually rechargeable batteries inserted
in the transmitter before connecting the charger. When charging normal (non-rechargeable) batteries,
there is a risk of fire and explosion!

• We recommend not charging rechargeable batteries directly in the transmitter but with a high-quality charger for

individual cells instead.

• Rechargeable batteries in the transmitter must not be quick-charged as this damages the transmitter and heats up

the cells in the transmitter excessively. Observe the maximum permissible charging current as indicated on the
transmitter or in the operating instructions of the remote control system.

• Only use a charger designed for the respective number of cells in the transmitter and the corresponding rechargeable

battery type.