Eurolite LED bar No. of LEDs: 16 51930412 Data Sheet
Product codes
51930412
00058997.DOC, Version 1.0
26/32
DMX MODE
You can control the devices individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.
occupation with different features.
The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the LED PIX-16 TCL Bar will respond to the controller.
which the LED PIX-16 TCL Bar will respond to the controller.
Please, be sure that you don’t have any overlapping channels in order to control each LED PIX-16 TCL Bar
correctly and independently from any other fixture on the DMX-chain. If several LED PIX-16 TCL Bars are
addressed similarly, they will work synchronically.
correctly and independently from any other fixture on the DMX-chain. If several LED PIX-16 TCL Bars are
addressed similarly, they will work synchronically.
If you set, for example, the address to channel 6, the device will use the channel 6 to 10 for control.
Controlling:
After having addressed the LED PIX-16 TCL Bar, you may now start operating it via your lighting controller.
Note: It’s necessary to insert the XLR termination plug (with 120 Ohm) in the last lighting in the link in order
to ensure proper transmission on the DMX data link.
After having addressed the LED PIX-16 TCL Bar, you may now start operating it via your lighting controller.
Note: It’s necessary to insert the XLR termination plug (with 120 Ohm) in the last lighting in the link in order
to ensure proper transmission on the DMX data link.
Addressing
Press the MODE button until the display shows DMX MODE.
Press the ENTER button and the display shows: 001.
Set the desired address via the UP or DOWN buttons.
Please press the ENTER button again to confirm and to select a DMX Channel Mode.
DMX Channel Selection : Choosing a DMX Channel Mode
The device has 7 DMX-modes. After having set the desired addresses and pressed ENTER, you can now
choose a DMX Channel Mode (5 CH, 6 CH, 9 CH, 15 CH, 27 CH, 48 CH, 51 CH).
The device has 7 DMX-modes. After having set the desired addresses and pressed ENTER, you can now
choose a DMX Channel Mode (5 CH, 6 CH, 9 CH, 15 CH, 27 CH, 48 CH, 51 CH).
Set the desired mode via the UP or DOWN buttons.
Press the ENTER button again to confirm and to exit the DMX Mode.
Press the ENTER button again to confirm and to exit the DMX Mode.
Please see the following DMX protocol graphic for the respective channel values.
DMX-Protocol
The LEDs of the devices are separated into several segments which can be controlled in the following 7
different DMX modes.
different DMX modes.
5-Channel Mode (default setting): All 16 LEDs as 1 segment
(compatible with EUROLITE DMX LED Operator 1, item no. 70064501 and EUROLITE DMX LED
Operator 4, item no. 70064504)
(compatible with EUROLITE DMX LED Operator 1, item no. 70064501 and EUROLITE DMX LED
Operator 4, item no. 70064504)
CH 1
Red (0 - 100 %)
CH 2
Green (0 - 100 %)
CH 3
Blue (0 - 100 %)
CH 4
Dimmer (0-255)
CH 5
0 -
0 On
1 -
5 Sound control (7 colors)
6 - 10 On
11 - 255 Flash (with increasing speed)
11 - 255 Flash (with increasing speed)