Sygonix Surveillance Camera CCD colour camera, 540 TVL, 3.6 mm 43579S Resolution 540 TVL Focal length 3.6 mm 43579S User Manual
Product codes
43579S
The home technology brand for the entire house. More information at www.sygonix.com
GB
Operating instructions
CCD colour camera, 540 TVL, 3.6 mm
CCD colour camera, 540 TVL, 3.6 mm
Proper use according to manufacturer's instructions
The camera in the metal enclosure serves for observation and protection of non-visible
or critical areas, respectively (e.g. shop monitoring, entry phones, entrance area, etc.)
or critical areas, respectively (e.g. shop monitoring, entry phones, entrance area, etc.)
The recorded images can be replayed on any suitable TV set or monitor with video
input.
input.
The camera is suitable for operation in outdoor areas (IP65).
Power is supplied via 12V/DC (power supply unit available; a 12V/DC 500 mA power
supply unit is recommended).
supply unit is recommended).
The built-in IR LEDs enable coverage of a max. of 20 metres at dark.
The camera's integrated infrared LEDs enable night vision. Please note that coloured
image reproduction changes into black and white monochrome when increasing dark-
ness activates the IR-LEDs. The brightness is detected by the camera using a photo
sensor on the front.
image reproduction changes into black and white monochrome when increasing dark-
ness activates the IR-LEDs. The brightness is detected by the camera using a photo
sensor on the front.
Please bear in mind that it is prohibited by law to observe strangers with a camera
without their knowledge and consent.
without their knowledge and consent.
Operating the product in any other way than described above is not permitted and
may lead to damage to the product, which can give rise to risks such as short circuit,
fi re and electric shock. The product must not be modifi ed or converted. Always ob-
serve the safety instructions included in these operating instructions. Read the operat-
ing instructions carefully and keep them for later reference.
may lead to damage to the product, which can give rise to risks such as short circuit,
fi re and electric shock. The product must not be modifi ed or converted. Always ob-
serve the safety instructions included in these operating instructions. Read the operat-
ing instructions carefully and keep them for later reference.
Package Contents
• Camera
• Assembly material
• Operating instructions
• Mounting tool
• Adjustment tool
Explanation of Symbols, Inscriptions
The lightening symbol indicates a health hazard, e.g. electric shock.
This symbol indicates specifi c risks associated with handling, function and
use.
use.
The arrow symbol indicates special tips and operating information.
Safety Instructions
The warranty will be void in the event of damage caused by failure to ob-
serve these safety instructions! We do not assume any liability for any
consequential damage!
serve these safety instructions! We do not assume any liability for any
consequential damage!
We do not assume any liability for material and personal damage caused
by improper use or non-compliance with the safety instructions. The
warranty will be null and void in such cases.
by improper use or non-compliance with the safety instructions. The
warranty will be null and void in such cases.
• The camera must not be modifi ed or converted, as not only will the CE ap-
proval become void but also the warranty.
• The camera should not be exposed to extreme temperatures, direct sun-
light, intense vibrations or heavy mechanical stress.
• The camera's integrated infrared LEDs enable night vision. Please note that
coloured image reproduction changes into black and white monochrome
when increasing darkness activates the IR-LEDs. The brightness is detected
by the camera using a photo sensor on the front.
when increasing darkness activates the IR-LEDs. The brightness is detected
by the camera using a photo sensor on the front.
• Where the device is used connected to other devices e.g. a monitor and a
mains supply unit, the operating instructions and safety instructions of the
connected devices must be followed.
connected devices must be followed.
• The use of the surveillance camera system does not replace the personal
supervision of children, or people who require special assistance, but only
serves as a support to this supervision.
serves as a support to this supervision.
• After rapid changes in temperature, the camera requires approx. 15 to stabi-
lise, in order to adjust to the surrounding temperature, before it can be used.
• Electronic devices are not toys and should be kept out of the reach of chil-
dren!
• Please contact a qualifi ed person if you are unsure about the safety and
correct use of the camera.
• Never leave the packaging material lying around unattended. Plastic fi lm/
bags etc. can be dangerous playthings for children; there is a risk of suffoca-
tion.
tion.
• If you have reason to assume that safe operation is no longer possible, dis-
connect the device immediately and secure it against inadvertent operation.
• It can be assumed that safe operation is no longer possible if:
- the device is visibly damaged,
- the device does not function any longer and
- the device was stored under unfavourable conditions for a long period of
time
or
or
- it has been subjected to considerable stress during transportation.
• In commercial institutions, the accident prevention regulations of the Em-
ployer’s Liability Insurance Association for Electrical Systems and Operating
Materials are to be observed.
Materials are to be observed.
• The camera is suitable for operation in outdoor areas (IP65).
• Power is supplied via 12V/DC (power supply unit available; a 12V/DC 500 mA
power supply unit is recommended).
• Maintenance, adjustment and repair may only be carried out by a qualifi ed
specialist or a specialised repair shop.
• If you have any questions, which are not answered in this manual, please
contact our technical service or another specialist.
Product view
A) Mounting tool
F) Camera enclosure
B) Locking screw
G) Middle mounting ring
C) Video output (BNC output)
H) Upper mounting ring
D) Connection for voltage supply 12V/DC
I) Mounting screws
E) Mounting plate
The camera's integrated infrared LEDs enable night vision. Please note that
coloured image reproduction changes into black and white monochrome
when increasing darkness activates the IR-LEDs. The brightness is detected
by the camera using a photo sensor on the front.
coloured image reproduction changes into black and white monochrome
when increasing darkness activates the IR-LEDs. The brightness is detected
by the camera using a photo sensor on the front.
Installation
Find a suitable place for the installation, from which the area to be monitored can be
observed.
observed.
A suitable place for installation of this camera has the following features:
• Vibration free
• No direct sunlight