Renkforce 3D printer RF1000 Single extruder (value.974113) RF1000 Data Sheet
Product codes
RF1000
95
18. Firmware Update
The firmware is updated frequently to optimise the properties of the 3D printer.
The currently installed firmware version of your printer is briefly displayed in the upper display line after switching on the printer.
The currently installed firmware version of your printer is briefly displayed in the upper display line after switching on the printer.
For firmware updates, see https://github.com/RF1000/Repetier-Firmware. Here, the most recent firmware updates are
provided. You can choose between two “branches”:
“Master” is the final version of the firmware.
“Development” is the version of the firmware that is currently subject to development.
The firmware link can also be reached in the custom software Repetier-Host under “Help” > “RF1000 Firmware”.
Update process
The printer must be connected to the USB interface of the computer and must not be connected to any other software
(for Repetier-Host, e.g. click “Separate”).
(for Repetier-Host, e.g. click “Separate”).
• Download the corresponding update file and save it on your computer.
• Execute the file arduino.exe, which is on the enclosed SD-card (folder “Arduino” and its version subfolders until you find the file
• Execute the file arduino.exe, which is on the enclosed SD-card (folder “Arduino” and its version subfolders until you find the file
“arduino.exe”.
• A window opens
• In the menu “Tools”, select the option “Board” and set the type “Arduino Mega 2560 or Mega ADK”.