Conrad 5V Linear Power Supply Board PCB Component 190795 Data Sheet
Product codes
190795
6
7
Dear customer, thank you for purchasing this power supply unit.
These installation and operating instructions contain basic instructions and im -
por tant information regarding safety, installation, commissioning and the op-
timal use of the unit. Keep these ope ra ting instructions for future refe rence!
These installation and operating instructions contain basic instructions and im -
por tant information regarding safety, installation, commissioning and the op-
timal use of the unit. Keep these ope ra ting instructions for future refe rence!
This device left the factory in a perfectly safe condition. In order to maintain
this condition and ensure safe operation the user must observe the safety instruc-
tions and warnings contained in these instructions!
this condition and ensure safe operation the user must observe the safety instruc-
tions and warnings contained in these instructions!
INTENDED USE
The intended use of this power supply is to supply a stabilised output voltage
corresponding to the technical indications.
corresponding to the technical indications.
This device is an extremely versatile fi xed voltage power supply unit whose IC
voltage regulator is equipped with an internal electronic and thermal overload
protection device. It is suitable for almost all applications, e.g. for the operation
of sets, assemblies and devices which require a well stabilised current supply.
Owing to the overload protection mentioned before, this power supply module
is also ideal for lab applications.
The device has an LED display.
Any other use of the device is not
permitted.
voltage regulator is equipped with an internal electronic and thermal overload
protection device. It is suitable for almost all applications, e.g. for the operation
of sets, assemblies and devices which require a well stabilised current supply.
Owing to the overload protection mentioned before, this power supply module
is also ideal for lab applications.
The device has an LED display.
Any other use of the device is not
permitted.
This product has been tested in
accordance with the EU guideline
89/336/EU (EMC law dated
09.11.1992,
accordance with the EU guideline
89/336/EU (EMC law dated
09.11.1992,
Electromagnetic
Com pa tibility) and complies with
the legal stipulations.
the legal stipulations.
2. Output voltage
The stabilised output voltage is taken from the connection terminals marked
„+“ and „–“. Observe the correct polarity of the voltage when connecting to a
consumer. Incorrect poling can result in the destruction of the connected consumer.
Make sure that the max. output current permissible for the power supply unit used
is not exceeded in order to protect the device from over loading!
„+“ and „–“. Observe the correct polarity of the voltage when connecting to a
consumer. Incorrect poling can result in the destruction of the connected consumer.
Make sure that the max. output current permissible for the power supply unit used
is not exceeded in order to protect the device from over loading!
INSTALLATION IN A HOUSING
If the device is installed in a housing, suffi cient ventilation must be ensured. The
cooler of the device can become very hot under certain circumstances. For this
reason a metal housing with adequate cooling slits should be used. Make sure to
observe the relevant VDE regulations when installing the device in a housing.
cooler of the device can become very hot under certain circumstances. For this
reason a metal housing with adequate cooling slits should be used. Make sure to
observe the relevant VDE regulations when installing the device in a housing.
GUARANTEE
We grant a 2 years warranty for this product. The warranty includes the repair
of defects which result clearly from incorrect materials or manufacturing mi-
stakes. For damages caused by not following the instructions the warranty will
be stated void. For consequential damages resulting thereof, no liability can
be taken. In the event of defects which occur as of delivery within the legal gu-
arantee period of two years, you have the legal right of subsequent fulfi llment
(either: rectifi cation of the defect or delivery of a new product) and – if the legal
prerequisites are met – the legal rights of reduction or withdrawal and additio-
nally compensation for damages. For reasons of safety and licensing (CE) it is
not allowed to modify the unit. Any additional claims are excluded.
of defects which result clearly from incorrect materials or manufacturing mi-
stakes. For damages caused by not following the instructions the warranty will
be stated void. For consequential damages resulting thereof, no liability can
be taken. In the event of defects which occur as of delivery within the legal gu-
arantee period of two years, you have the legal right of subsequent fulfi llment
(either: rectifi cation of the defect or delivery of a new product) and – if the legal
prerequisites are met – the legal rights of reduction or withdrawal and additio-
nally compensation for damages. For reasons of safety and licensing (CE) it is
not allowed to modify the unit. Any additional claims are excluded.
ENVIRONMENTAL PROTECTION
Please note that electrical and electronic devices must never be
disposed of in regular household waste. Consumers are legally re-
sponsible for the proper disposal of electronic and electrical devices
by returning them to collecting sites designated for the recycling of
disposed of in regular household waste. Consumers are legally re-
sponsible for the proper disposal of electronic and electrical devices
by returning them to collecting sites designated for the recycling of
electrical and electronic equipment waste.
STABILISED POWER
SUPPLY UNITS 12/5 V
Art.-No. 19 08 35/19 07 95
SAFETY INSTRUCTIONS
When handling products which come into contact with electrical charge, the
relevant VDE regulations must be observed.
– Assemblies and components must be kept out of reach of children.
– In devices with an operation voltage > 35 Volts, fi nal installation may only be
relevant VDE regulations must be observed.
– Assemblies and components must be kept out of reach of children.
– In devices with an operation voltage > 35 Volts, fi nal installation may only be
carried out by a qualifi ed electrician in accordance with the VDE regu lations.
– Devices designed for mains operation may only be operated at 230 V/50 Hz.
– The correct fuses must be integrated in the connection lines for the device.
– The device must be completely cut from the power supply before changing
– The correct fuses must be integrated in the connection lines for the device.
– The device must be completely cut from the power supply before changing
the fuse.
– If the device is installed in a housing, suffi cient air circulation must be ensured.
– The device is designed for use in dry, clean rooms.
– In industrial premises the relevant accident prevention regulations for electrical
– The device is designed for use in dry, clean rooms.
– In industrial premises the relevant accident prevention regulations for electrical
systems and equipment must be observed.
– In schools, training centres, hobby and selfhelp workshops the operation of
assemblies must be responsibly monitored by trained personnel.
– Do not operate the assembly in an environment where there are fl ammable
gases, vapours or dust or where these may occur.
MALFUNCTIONS
If it can be assumed that a safe operation is no longer possible, the device
has to be taken out of operation and be
has to be taken out of operation and be
secured against accidental use if:
–
the device shows mechanical damage.
–
the device is not functioning.
–
parts of the device are loose or not attached.
– connecting cables show
any visible damage
.
If the device needs to be repaired, only original spare parts may be used.
The use of any other spare parts may lead to serious damage to property and
personal injury! The device may only be repaired by a qualifi ed person.
The use of any other spare parts may lead to serious damage to property and
personal injury! The device may only be repaired by a qualifi ed person.
CONNECTION INSTRUCTIONS
1. Mains connection
The mains voltage is connected at the terminals marked „230V/50Hz“. Make
sure to observe the VDE regulations, as incorrect handling of 230V mains
voltage can be fatal.
sure to observe the VDE regulations, as incorrect handling of 230V mains
voltage can be fatal.
Technical Data
– Input voltage: 230V/50Hz/~
– Output voltage/current:
– Output voltage/current:
19 08 35: 12 V/85 mA
19 07 95: 5 V/100 mA
19 07 95: 5 V/100 mA
– Short circuit resistant: brief
– Residual ripple: < 50 mV
– Operation temperature: 0°C – 40°C
– Residual ripple: < 50 mV
– Operation temperature: 0°C – 40°C
This manual is a publication of H-TRONIC GmbH, Industriegebiet Dienhof 11, 92242
Hirschau, Germany. All rights including translation reserved. Reprinting, also for parts
only, is prohibited. This manual is according to the technical status at the time of printing.
Changes in technique, equipment and design reserved. We assume no liability for printing
errors. © Copyright 2012 by H-TRONIC GmbH
Dieses kompakte Stromversorgungs-
modul liefert eine stabilisierte und
kurzschlussfeste Ausgangsspannung.
Es eignet sich für fast alle Anwen-
dungsbereiche, z.B. zum Betrieb
von Bausätzen, Baugruppen und
Geräten, die eine gute stabilisiere
Stromversorgung erfordern. Durch den
integrierten Überlastschutz ist dieses
Stromversorgungsmodul auch für die
Laborpraxis gut geeignet. Die Betriebs-
anzeige des Gerätes erfolgt durch
eine Leuchtdiode.
modul liefert eine stabilisierte und
kurzschlussfeste Ausgangsspannung.
Es eignet sich für fast alle Anwen-
dungsbereiche, z.B. zum Betrieb
von Bausätzen, Baugruppen und
Geräten, die eine gute stabilisiere
Stromversorgung erfordern. Durch den
integrierten Überlastschutz ist dieses
Stromversorgungsmodul auch für die
Laborpraxis gut geeignet. Die Betriebs-
anzeige des Gerätes erfolgt durch
eine Leuchtdiode.
NETZTEIL-BAUSTEIN 5 V
www.h-tronic.de
Art.-Nr. 19 07 95
Technische Daten
– Versorgungsspannung:
230V/50Hz/~
– Ausgangspannung: 5 V =
– Ausgangsstrom: max. 100 mA
– Kurzschlussfest: kurzzeitig
– Restwelligkeit: < 50 mV
– Betriebstemperatur: 0°C – 40°C
– Ausgangsstrom: max. 100 mA
– Kurzschlussfest: kurzzeitig
– Restwelligkeit: < 50 mV
– Betriebstemperatur: 0°C – 40°C
Diese Bedienungsanleitung ist eine Publikation der H-Tronic GmbH,
Industriegebiet Dienhof 11, 92242 Hirschau. Alle Rechte einschließlich
Übersetzung vorbehalten. Reproduktionen jeder Art, z.B. Fotokopie,
Mikroverfi lmung oder die Erfassung in EDV-Anlagen, bedürfen der
schriftlichen Genehmigung des Herausgebers. Nachdruck, auch
auszugsweise, verboten. Diese Bedienungsanleitung entspricht dem
technischen Stand bei Drucklegung und ist Bestandteil dieses Gerätes.
Irrtümer und Änderung in Technik, Ausstattung und Design vorbehalten.
© Copyright 2012 by H-TRONIC GmbH
Industriegebiet Dienhof 11, 92242 Hirschau. Alle Rechte einschließlich
Übersetzung vorbehalten. Reproduktionen jeder Art, z.B. Fotokopie,
Mikroverfi lmung oder die Erfassung in EDV-Anlagen, bedürfen der
schriftlichen Genehmigung des Herausgebers. Nachdruck, auch
auszugsweise, verboten. Diese Bedienungsanleitung entspricht dem
technischen Stand bei Drucklegung und ist Bestandteil dieses Gerätes.
Irrtümer und Änderung in Technik, Ausstattung und Design vorbehalten.
© Copyright 2012 by H-TRONIC GmbH
H-TRONIC GmbH Industriegebiet Dienhof 11 92242 Hirschau
Tel. +49 (0)9622/7020-0 kontakt@h-tronic.de
Tel. +49 (0)9622/7020-0 kontakt@h-tronic.de