Trinamic TMC603-LA-X Predriver TMC603 For BLDC Motors With Commuting Without Sensors TMC603-LA-X Data Sheet
Product codes
TMC603-LA-X
TMC603 DATA SHEET (V. 1.06 / 26. Mar. 2009)
1
Copyright © 2008 TRINAMIC Motion Control GmbH & Co. KG
TRINAMIC
®
Motion Control GmbH & Co. KG
Sternstraße 67
D
D
– 20357 Hamburg
GERMANY
1 Features
The TMC603 is a three phase motor driver for highly compact and energy efficient drive solutions. It
contains all power and analog circuitry required for a high performance BLDC motor system. The
TMC603 is designed to provide the frontend for a microcontroller doing motor commutation and control
algorithms. It directly drives 6 external N-channel MOSFETs for motor currents up to 30A and up to
50V and integrates shunt less current measurement, by using the MOSFETs channel resistance for
sensing. Integrated hallFX (pat. fil.) allows for sensorless commutation. Protection and diagnostic
features as well as a step down switching regulator further reduce system cost and increase reliability.
Highlights
contains all power and analog circuitry required for a high performance BLDC motor system. The
TMC603 is designed to provide the frontend for a microcontroller doing motor commutation and control
algorithms. It directly drives 6 external N-channel MOSFETs for motor currents up to 30A and up to
50V and integrates shunt less current measurement, by using the MOSFETs channel resistance for
sensing. Integrated hallFX (pat. fil.) allows for sensorless commutation. Protection and diagnostic
features as well as a step down switching regulator further reduce system cost and increase reliability.
Highlights
Up to 30A motor current
9V to 50V operating voltage
3.3V or 5V interface
8mm x 8mm QFN package
Integrated shunt less current measurement using power MOS transistor RDSon
hallFX
™ sensorless back EMF commutation emulates hall sensors
Integrated break-before-make logic: No special microcontroller PWM hardware required
EMV optimized current controlled gate drivers
– up to 150mA possible
Overcurrent / short to GND and undervoltage protection and diagnostics integrated
Internal Q
GD
protection: Supports latest generation of power MOSFETs
Integrated supply concept: Step down switching regulator up to 500mA / 300kHz
Common rail charge pump allows for 100% PWM duty cycle
Applications
Motor driver for industrial applications
Integrated miniaturized drives
Robotics
High-reliability drives (dual position sensor possible)
Pump and blower applications with sensorless commutation
Motor type
3 phase BLDC, stepper, DC motor
Sine or block commutation
Rotor position feedback: Sensorless, encoder or hall sensor, or any mix
TMC603
– DATASHEET
Three phase motor driver with BLDC back EMF
commutation hallFX
commutation hallFX
™ and current sensing