Advantech USB-4711 USB-data acquisition module, 16 analogue input module 12 bit with 8 dig. I/O USB-4711 Data Sheet
Product codes
USB-4711
Features
www.advantech.com/products
Online Download
All product specifications are subject to change without notice
Last updated : 20-Jan-2006
USB-4711
Introduction
The USB-4700 series consists of true Plug & Play data acquisition modules. No more opening up your computer chassis to install boards. Just plug in the module, then get the
data. It’s easy and efficient. Reliable and rugged enough for industrial applications, yet inexpensive enough for home projects, the USB-4711 is the perfect way to add measurement
and control capability to any USB capable computer. The USB-4711 is fully USB Plug & Play and easy to use. It obtains all required power from the USB port, so no external power
connection is ever required.
data. It’s easy and efficient. Reliable and rugged enough for industrial applications, yet inexpensive enough for home projects, the USB-4711 is the perfect way to add measurement
and control capability to any USB capable computer. The USB-4711 is fully USB Plug & Play and easy to use. It obtains all required power from the USB port, so no external power
connection is ever required.
100 kS/s, 12-bit Multifunction USB Module
Supports USB 2.0
Portable
No need for external power
16 analog input channels
12-bit resolution AI
Sampling rate up to 100 kS/s
8 DI / 8 DO, 2 AO and one 32-bit event counter
Wiring terminal on modules
Portable
No need for external power
16 analog input channels
12-bit resolution AI
Sampling rate up to 100 kS/s
8 DI / 8 DO, 2 AO and one 32-bit event counter
Wiring terminal on modules
NEW
Specifications
Analog Input
Channels
16 Single-ended
Resolution
12 bits
Max. Sampling Rate* 100k S/s max. (For USB 2.0)
FIFO Size
1024 samples
Overvoltage Protection 30 Vp-p
Input Impedance
2 M
Ω/5 pF
Sampling Modes
Software, onboard programmable pacer, or external
Input Range
(V, software programmable)
Bipolar
± 10
± 5
± 2.5
± 1.25
± 0.625
Accuracy (% of FSR ±1LSB)
0.01
0.01
0.02
0.02
0.04
*Note:
The sampling rate and throughput depends on the computer hardware architecture and
software environment. The rates may vary due to programming language, code efficiency,
CPU utilization and so on.
The sampling rate and throughput depends on the computer hardware architecture and
software environment. The rates may vary due to programming language, code efficiency,
CPU utilization and so on.
Analog Output
Channels
2
Resolution
12 bits
Output Rate
Static update
Output Range
(V, software programmable)
Internal Reference
Unipolar
0 ~ 5, 0 ~ 10
Bipolar
±5, ±10
Slew Rate
11 V/µs
Driving Capability
3 mA @ 10 V
Output Impedance
0.81
Ω
Operation Mode
Single output
Accuracy
Relative: ±1 LSB
Differential Non-linearity: ±1 LSB
Differential Non-linearity: ±1 LSB
Digital Inputs
Channels
8
Compatibility
3.3 V/5 V/TTL
Input Voltage
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Logic 1: 2.0 V min.
Digital Outputs
Channels
8
Compatibility
3.3 V/TTL
Output Voltage
Logic 0: 0.8 V max.@ 4 mA (sink)
Logic 1: 2.0 V min.@ 4 mA (source)
Logic 1: 2.0 V min.@ 4 mA (source)
Output Capability
Sink: 4 mA
Source: 4 mA
Source: 4 mA
Event Counter
Channels
1
Compatibility
3.3 V/5 V/TTL
Max. Input Frequency 1 kHz
General
Bus Type
USB 2.0
I/O Connector
On board screw terminal
Dimensions (L x W x H) 132 x 80 x 32 mm
Power Consumption
Typical: +5 V @ 340 mA
Max: +5 V @ 440 mA
Max: +5 V @ 440 mA
Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
Storing Temperature
-20 ~ 70° C (-4 ~ 158° F)
Storing Humidity
5 ~ 95% RH non-condensing (refer to IEC 68-2-3)
Ordering Information
USB-4711
100 kS/s, 12-bit Multifunction USB Module. CD,
manual and one 1.8 m USB 2.0 cable included
manual and one 1.8 m USB 2.0 cable included
USB