Faber Kabel Green 101049 Data Sheet

Product codes

101049

DBL_BUS_EIB_KNX.PDF Issue 01.11.2013 Klaus Faber AG, 66113 Saarbrücken, Lebacher Str. 152-156, Tel.: (0681) 9711-0, FAX: - 289

Bus Cables EIB/KNX

conductor material:

bare copper

conductor construction:

solid, class 1

insulation:

PVC TI1

stranding unit:

pair

stranding:

layers

sheathing material:

PVC TM1

flame retardant:

VDE 0482-332-1-2/IEC 60332-1

max. operating temperature,

fixed:

-30 - +70 °C

specific inductivity:

680 mH/km

operating capacity:

100 nF/km

loop resistance:

73,2 Ohm/km

nominal voltage U:

300 V

test voltage:

2 kV

core identification:

colours acc. VDE 0815

Application: Due to the increased test voltage and the special marking the cable is desined as bus cable in the EIB/
KNX facility control system according to EN 50090. For the Instabus itself is used only the red/black pair (transmission
of 24 V supply voltage plus data packages), the second pair (white/yellow) is redundant.The cable may be installed on
or under plaster, in ducts and installation channels in dry or wet rooms.

The products and information presented here are for technical calculation only. They are subject to technical progress and in no way represent the

ability of shipment. Outer diameters are approximately.

Table: Technical characteristics

p/n

part name

[mm]

[kg/km]

[kg]

101010

FACAB EIB-Busleitung
02X2X0,8 GN

0,8

6,3

101011

FACAB EIB-Busleitung
04X2X0,8 GN

0,8

8,8

Table: Technical characteristics

p/n

part name

[mm]

[kg/km]

[kg]

101049

FACAB EIB-Busleitung
halogenfrei 02X2X0,8 GN

0,8

6,3

diameter of conductor

outer diameter

copper

weight