Apem Joystick 250 Vac Toggle Soldering IP65 (front) 100212 1 pc(s) 100212 Data Sheet
Product codes
100212
1000 SERIES - MICROSWITCH JOYSTICKS
USEFUL DIMENSIONS
The joystick is mounted from beneath the panel using the 4 x M2.5
machine screws, supplied with the joystick.
Supplied as standard with the joystick is a round bezel which may
be fitted (according to customer preference) to finish the front face
of the panel. Fitting the bezel is optional, and is not necessary if
the panel cut-out finishes the panel.
machine screws, supplied with the joystick.
Supplied as standard with the joystick is a round bezel which may
be fitted (according to customer preference) to finish the front face
of the panel. Fitting the bezel is optional, and is not necessary if
the panel cut-out finishes the panel.
The joystick is mounted from beneath the panel. Supplied as
standard with all bush mount joysticks is an adhesive P.V.C. sealing
gasket. This should be fitted between the joystick and the panel,
in applications where a good seal is needed.
standard with all bush mount joysticks is an adhesive P.V.C. sealing
gasket. This should be fitted between the joystick and the panel,
in applications where a good seal is needed.
36.00
.
0
45
5
36.00
5
5
4
.
0
Ø2.80 x 4
Ø2.80 x 4
20.00 Ø
20.00 Ø
MOUNTING CUT-OUT
MOUNTING CUT-OUT
MOUNTING CUT-OUT
22.00
9.20
20.00
V4 BUSH MOUNT - PANEL CUT-OUT & MOUNTING INSTALLATION
V4 SCREW MOUNT - PANEL CUT-OUT & MOUNTING INSTALLATION
V3 SCREW MOUNT - PANEL CUT-OUT & MOUNTING INSTALLATION
The joystick is mounted from beneath the panel using the 4 x M2.5
machine screws, supplied with the joystick. Supplied as standard with
the joystick is a round bezel which may be fitted (according to customer
preference) to finish the front face of the panel. Fitting the bezel is
optional, and is not necessary if the panel cut-out finishes the panel.
machine screws, supplied with the joystick. Supplied as standard with
the joystick is a round bezel which may be fitted (according to customer
preference) to finish the front face of the panel. Fitting the bezel is
optional, and is not necessary if the panel cut-out finishes the panel.
8
www.apem.com