TP-LINK M7350 User Manual

Page of 57
M7350 
LTE-Advanced Mobile WiFi User Guide 
 
-5- 
Chapter 2.  Hardware Installation 
2.1  Environment Requirements 
 
Place the Device in a well-ventilated place far from any heater or heating vent   
 
Avoid direct irradiation of any strong light (such as sunlight) 
 
Keep at least 2 inches (5 cm) of clear space around the Device 
 
Operating Temperature: 0℃ ~35℃ (32℉~95℉) 
 
Operating Humidity: 10%~90%RH, Non-condensing 
2.2  Hardware Installation 
STEP 1:    Install SIM card and memory card. 
1)  Open the cover upwards (as the arrow shows). 
 
2)  Make sure to have the SIM card’s metal chip downwards and the triangle notch outwards, 
and then slide the card into its slot (in the direction as the arrow shows). 
 
 
Note: 
If you have a Micro-SIM or Nano-SIM, please use an adapter to convert it to a standard SIM 
card. 
3) 
First, push and then lift the locker to open it. Second, have the memory card’s metal chip 
downwards and inwards, and then fit it in its slot. 
Finally, put down and then pull the locker 
to lock it.