TP-LINK TL-SG105E User Manual
Easy Smart Configuration Utility
User Guide
33
Figure 6-6 802.1Q VLAN PVID Setting
The following entries are displayed on this screen:
¾
802.1Q VLAN PVID Setting
Select:
Select the desired port for configuration. It is multi-optional.
Port:
Displays the port number.
PVID:
Enter a PVID number for the port. When adding the tag header to
the received untagged packet, the switch will automatically uses
this PVID value as the VLAN ID of the added tag.
the received untagged packet, the switch will automatically uses
this PVID value as the VLAN ID of the added tag.
LAG:
Displays the LAG to which the port belongs.
Note:
1. 802.1Q VLAN should be enabled before setting PVID.
page to configure the LAG status of the port.