TP-LINK JetStream TL-SG3424 TL-SG3424 Data Sheet

Product codes

TL-SG3424

Figure 12-8 Notification Config

The following entries are displayed on this screen:



Create Notification

IP Mode:

Select the IP Mode.

IP Address:

Enter the IP Address of the management Host.

UDP Port:

Enter the number of the UDP port used to send notifications.
The UDP port functions with the IP address for the notification
sending. The default is 162.

User:

Enter the User name of the management station.

Security Model:

Select the Security Model of the management station.

Security Level:

Select the Security Level for the SNMP v3 User.

 noAuthNoPriv: No authentication and no privacy security

level is used.

 authNoPriv: Only the authentication security level is used.
 authPriv: Both the authentication and the privacy security

levels are used.

Type:

Select the type for the notifications.

 Trap: Indicates traps are sent.
 Inform: Indicates informs are sent. The Inform type has a

higher security than the Trap type.

Retry:

Specify the amount of times the switch resends an inform
request. The switch will resend the inform request if it doesn’t
get the response from the management station during the
Timeout interval, and it will terminate resending the inform
request if the resending times reach the specified Retry times.

Timeout:

Specify the maximum time for the switch to wait for the
response from the management station before resending a
request.



Notification Table

Select:

Select the desired entry to delete the corresponding
management station.

201