TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch TL-SL3428 Data Sheet
Product codes
TL-SL3428
Figure 9-7 DSCP Priority
The following entries are displayed on this screen:
DSCP Priority Config
DSCP Priority:
Select Enable or Disable DSCP Priority.
Priority Level
DSCP:
Indicates the priority determined by the DS region of IP datagram.
It ranges from 0 to 63.
It ranges from 0 to 63.
Priority Level:
Indicates the priority level the packets with tag are mapped to. The
priority levels are labeled as TC0, TC1, TC2 and TC3.
priority levels are labeled as TC0, TC1, TC2 and TC3.
Note:
To complete QoS function configuration, you have to go to the Schedule Mode page to select a
schedule mode after the configuration is finished on this page.
schedule mode after the configuration is finished on this page.
Configuration Procedure:
Step Operation
Description
1
Log on to the DSCP Priority
page
page
2
Enable DP priority function
Required. By default, the DSCP priority function is
disabled.
disabled.
115