TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Fully Managed Switch TL-SL5428E Data Sheet
Product codes
TL-SL5428E
VLAN Create/Delete
If selected, the switch will send a VLAN Create/Delete trap when a
VLAN is being created or deleted.
VLAN is being created or deleted.
IP Change:
If selected, the switch will send an IP Change trap when the IP
address of the switch is changed.
address of the switch is changed.
Storm Control:
If selected, the switch will send a Storm Control trap when the
broadcast, multicast or UL rate exceeds the limit. You can
configure the limit on QoS→Bandwidth Control →Storm
Control page.
broadcast, multicast or UL rate exceeds the limit. You can
configure the limit on QoS→Bandwidth Control →Storm
Control page.
Bandwidth Control:
If selected, the switch will send a Bandwidth Control trap when the
traffic rate of a port exceeds the limit. You can configure the limit
on QoS→Bandwidth Control→Rate limit page.
traffic rate of a port exceeds the limit. You can configure the limit
on QoS→Bandwidth Control→Rate limit page.
LLDP:
If selected, the switch will send an LLDP trap when the status of
LLDP changes.
LLDP changes.
MAC Address Table:
If selected, the switch will send a MAC Address Table trap when
the MAC address table has any changes.
the MAC address table has any changes.
Loopback Detection:
If selected, the switch will send a Loopback Detection trap when
the status of loopback detection changes.
the status of loopback detection changes.
Spanning Tree:
If selected, the switch will send a Spanning Tree trap when the
status of STP on the port changes.
status of STP on the port changes.
Port Access:
If selected, the switch will send a Port Access trap when some
users try to log on to the web management page via ports
that have no authority. You can configure the access control policy
on System→Access Security→Access Control page.
users try to log on to the web management page via ports
that have no authority. You can configure the access control policy
on System→Access Security→Access Control page.
IP-MAC Binding:
If selected, the switch will send an IP-MAC Binding trap when it
receives a packet from the host that does not match the rules in
IP-MAC binding table. You can configure the IP-MAC Binding
policy on Network Security→IP-MAC Binding page.
receives a packet from the host that does not match the rules in
IP-MAC binding table. You can configure the IP-MAC Binding
policy on Network Security→IP-MAC Binding page.
IP Duplicate:
If selected, the switch will send an IP Duplicate trap when another
host uses the switch's IP address.
host uses the switch's IP address.
DHCP Filter:
If selected, the switch will send a DHCP Filter trap when it
receives a DHCP packet from an untrusted port.
receives a DHCP packet from an untrusted port.
Port Traps
Port Select:
Click the Select button to quick-select the corresponding port
based on the port number you entered.
based on the port number you entered.
Select:
Select your desired port for configuration. It is multi-optional.
Port:
Displays the port number.
Link Status:
Enable/Disable Link Status traps for the desired port.
Note:
To enable the Link Status traps for the desired port, please select the “Link Status” on the SNMP
Traps first, otherwise, it will not take effect.
Traps first, otherwise, it will not take effect.
232