TP-LINK 16-Port Gigabit Web Smart Switch with 2 Combo SFP Slots TL-SG2216WEB Data Sheet

Product codes

TL-SG2216WEB

8.2.4 Port Config

On this page you can configure MLD Snooping function with each single port.
Choose the menu

Multicast→MLD Snooping→Port Config to load the following page.

The following entries are displayed on this screen:



Port Config

Select:

Select the port you want to configure.

Port:

Displays the port number.

Filter:

Choose to enable or disable filter function in this port.

Filter Mode:

Choose the filter action mode. You can accept or

refuse Report message with specific multicast groups

specify by the filter IDs.

Filter IDs:

Enter the filter IDs with this port. The filter IDs are

configured in

Filer Config. The format is 1,4,12.

The max number of filter entries on each port is 15.

Max Groups:

Enter the maximum groups which the port can join as

the member port. It ranges from 0 to 256.

LAG:

Displays the LAG number.

Note:

If the Max Groups value is set less than the current value, some groups may be deleted to satisfy

the restriction.

8.2.5 Static Multicast

On this page you can configure static multicast groups. The multicast groups configured here are
not learned by MLD Snooping and independent of dynamic multicast groups and multicast filters.

The static multicast member ports won’t age out.

113