TP-LINK 16-Port Gigabit Web Smart Switch with 2 Combo SFP Slots TL-SG2216WEB Data Sheet
Product codes
TL-SG2216WEB
2.3 Appearance Description
2.3.1 Front Panel
The front panel of TL-SG2216 is shown as Figure 2-1.
Figure 2-1 Front Panel of TL-SG2216
The front panel of TL-SG2424 is shown as Figure 2-2.
Figure 2-2 Front Panel of TL-SG2424
The front panel of TL-SG2424P is shown as Figure 2-3.
Figure 2-3 Front Panel of TL-SG2424P
The front panel of TL-SG2452 is shown as Figure 2-4.
Figure 2-4 Front Panel of TL-SG2452
The following parts are located on the front panel of TL-SG2216/TL-SG2424/TL-SG2424P/
TL-SG2452:
Reset: Press this button for five seconds or above to reset the software setting back to factory
default setting.
default setting.
10/100/1000Mbps Ports: Designed to connect to the device with a bandwidth of 10Mbps,
100Mbps or 1000Mbps. Each has a corresponding 1000Mbps LED and link/Act LED.
100Mbps or 1000Mbps. Each has a corresponding 1000Mbps LED and link/Act LED.
SFP Ports: Designed to install the SFP module. TL-SG2216/TL-SG2424/TL-SG2424P switch
features some SFP transceiver slots that are shared with the associated RJ45 ports. The
associated two ports are referred to as “combo” ports, which means they cannot be used
simultaneously, otherwise only SFP ports work. TL-SG2452 features 4 individual SFP ports.
features some SFP transceiver slots that are shared with the associated RJ45 ports. The
associated two ports are referred to as “combo” ports, which means they cannot be used
simultaneously, otherwise only SFP ports work. TL-SG2452 features 4 individual SFP ports.
7