LaCie DT USB2.0 PCI CARD/4 + 1 PORTS/NEC CHIP (20 UNITS) 706349 User Manual

12

12) The Copying files… window will appear again, showing you the copying

rate. The next window that appears is the final window, click Finish to
complete.

To verify that the driver was installed correctly, right-click on My Computer,

then click on Properties. After the System Properties window is displayed,
click on the Device Manager tab and scroll down to the Universal Serial

Bus controllers icon and expand the selection by clicking on the plus sign.
Underneath the Universal Serial Bus icon, you should see two strings that say,
“NEC PCI to USB Open Host Controller” and one string that says “NEC

 

PCI to

USB Enhanced Host Controller (there may be another name at the beginning
of the strings, depending on the chip set manufacturer).”

If these are visible, then the installation of your LaCie USB 2.0 PCI Card
drivers is now finished and you may begin using your new card.

1) Turn on your computer. Insert the LaCie Driver CD (shipped with your PCI
card) in your computer’s internal CD-ROM drive. A window will appear from
your System Tray (located in the lower right-hand corner of your screen),
alerting you that the operating system (Windows XP) has detected new
hardware.

2) When the Found New
Hardware Wizard
window (Fig. 2.1) appears
on the screen, select
“Install from a list or
specific location…” and
click Next to continue.

Fig. 2.1