Sony BDV-N5200W BDVN5200WB Data Sheet
Product codes
BDVN5200WB
64
GB
BDV-N9200W/BDV-N9200WL/BDV-N7200W/BDV-N7200WL/BDV-N5200W
4-485-800-13(1)
D:\NORM'S JOB\SONY HA\SO140001\BDV-N9200_7200_5200_E3200
(PMRF 02)\4485800131_GB (CEK)\100ADD.fm
(PMRF 02)\4485800131_GB (CEK)\100ADD.fm
masterpage: Left
Precautions
On safety
• Should any solid object or liquid fall
into the cabinet, unplug the system
and have it checked by qualified
personnel before operating it any
further.
and have it checked by qualified
personnel before operating it any
further.
• Do not touch the AC power cord
(mains lead) with wet hands. Doing so
may cause an electric shock.
may cause an electric shock.
On power sources
If you are not going to use the system
for a long time, be sure to disconnect
the system from the wall outlet. To
disconnect the AC power cord (mains
lead), grasp the plug itself; never pull
the cord.
for a long time, be sure to disconnect
the system from the wall outlet. To
disconnect the AC power cord (mains
lead), grasp the plug itself; never pull
the cord.
On placement
• Place the system in a location with
adequate ventilation to prevent heat
build-up in the system.
build-up in the system.
• Although the system heats up during
operation, this is not a malfunction. If
you continuously use this system at a
large volume, the cabinet temperature
of the top, side and bottom rises
considerably. To avoid burning
yourself, do not touch the cabinet.
you continuously use this system at a
large volume, the cabinet temperature
of the top, side and bottom rises
considerably. To avoid burning
yourself, do not touch the cabinet.
• Do not place the system on a soft
surface (rugs, blankets, etc.) that
might block the ventilation holes.
might block the ventilation holes.
• Do not install the system near heat
sources such as radiators, air ducts, or
in a place subject to direct sunlight,
excessive dust, mechanical vibration,
or shock.
in a place subject to direct sunlight,
excessive dust, mechanical vibration,
or shock.
• Do not install the system in an inclined
position. It is designed to be operated
in a horizontal position only.
in a horizontal position only.
• Keep the system and discs away from
components with strong magnets,
such as microwave ovens, or large
loudspeakers.
such as microwave ovens, or large
loudspeakers.
• Do not place heavy objects on the
system.
• Do not place metal objects in front of
the front panel. It may limit reception
of radio waves.
of radio waves.
• Do not place the system in a place
where medical equipment is in use. It
may cause a malfunction of medical
equipment.
may cause a malfunction of medical
equipment.
• If you use a pacemaker or other
medical device, consult your physician
or the manufacturer of your medical
device before using the wireless LAN
function.
or the manufacturer of your medical
device before using the wireless LAN
function.
On operation
If the system is brought directly from a
cold to a warm location, or is placed in a
very damp room, moisture may
condense on the lenses inside the main
unit. Should this occur, the system may
not operate properly. In this case,
remove the disc and leave the system
turned on for about half an hour until
the moisture evaporates.
cold to a warm location, or is placed in a
very damp room, moisture may
condense on the lenses inside the main
unit. Should this occur, the system may
not operate properly. In this case,
remove the disc and leave the system
turned on for about half an hour until
the moisture evaporates.
On adjusting volume
Do not turn up the volume while
listening to a section with very low level
inputs or no audio signals. If you do, the
speakers may be damaged when a peak
level section is suddenly played.
listening to a section with very low level
inputs or no audio signals. If you do, the
speakers may be damaged when a peak
level section is suddenly played.
On cleaning
Clean the cabinet, panel, and controls
with a soft cloth slightly moistened with
a mild detergent solution. Do not use
any type of abrasive pad, scouring
powder or solvent such as alcohol or
benzine.
with a soft cloth slightly moistened with
a mild detergent solution. Do not use
any type of abrasive pad, scouring
powder or solvent such as alcohol or
benzine.
Additional Information