Sony BDV-N5200W BDVN5200WB Data Sheet

72

GB

BDV-N9200W/BDV-N9200WL/BDV-N7200W/BDV-N7200WL/BDV-N5200W

4-485-800-13(1)

D:\NORM'S JOB\SONY HA\SO140001\BDV-N9200_7200_5200_E3200 
(PMRF 02)\4485800131_GB (CEK)\100ADD.fm

masterpage: Left

t Check the following and refer to the 

operating instructions supplied with 
the equipment. 
• The connected equipment is 

compatible with the [Control for 
HDMI] function. 

• The connected equipment’s 

setting for the [Control for HDMI] 
function is correct. 

The system cannot connect to the 
network.
t Check the network connection 

(page 25) and the network settings 
(page 62).

You cannot connect your PC to the 
Internet after [Wi-Fi Protected Setup 
(WPS)] is performed.
t The wireless settings of the router 

may change automatically if you 
use the Wi-Fi Protected Setup 
function before adjusting the 
settings of the router. In this case, 
change the wireless settings of your 
PC accordingly.

The system cannot connect to the 
network or the network connection is 
unstable.
t Check if the wireless LAN router is 

on.

t Check the network connection 

(page 25) and the network settings 
(page 62).

t Depending on the usage 

environment, including the wall 
material, radio wave reception 
conditions, or obstacles between 
the system and the wireless LAN 
router, the possible communication 
distance may be shortened. Move 
the system and the wireless LAN 
router closer to each other.

t Devices that use a 2.4 GHz 

frequency band, such as a 
microwave, BLUETOOTH, or digital 
cordless device, may interrupt 
communication. Move the main 
unit away from such devices, or turn 
off such devices.

t The wireless LAN connection may 

be unstable depending on the 
usage environment, especially 
while using the BLUETOOTH 
function of the system. In this case, 
adjust the usage environment.

The wireless router you want is not 
shown in the wireless network list.
t Press RETURN to return to the 

previous screen, and try [Wireless 
Setup(built-in)] again. If the wireless 
router you want is still not detected, 
select [New connection registration] 
from the network list, then select 
[Manual registration] to input a 
network name (SSID) manually.

Pairing cannot be done. 
t Move the BLUETOOTH device closer 

to the main unit.

t Pairing may not be possible if other 

BLUETOOTH devices are present 
around the main unit. In this case, 
turn off the other BLUETOOTH 
devices.

t Delete the system from your 

BLUETOOTH device and perform 
pairing again (page 34).