Philips HDP1550 HDP1550/EU Data Sheet

Use a brush or lens cleaning paper for cleaning the lens 
of the projector.

A overheat symbol appears if the device is overheated. 

1 Use  SD  memory  card  in  the  file  system  FAT16  or 

FAT32.

2 Save the latest firmware update file to the root of 

the memory card.

3 Insert the memory card (see Inserting a Memory 

Card, page 16) and switch the device on.

4 Use the navigation keys to select Settings. 

5 Confirm with 

à.

6 Use 

/ to select Maintenance.

7 Confirm with 

à.

8 Use 

/ to select Firmware Update.

9 Confirm with 

à.

10 Use 

/ to select Install.

11 Confirm with 

à.

12 The device turns off and on again. After around 5 

minutes the Language Selection screen appears. 
The firmware update is now completed.

Use a soft, lint-free cloth. Never use liquid or 
easily flammable cleansers (sprays, abrasives, 
polishes, alcohol, etc.). Do not allow any 
moisture to reach the interior of the device. 
Do not spray the device with any cleaning flu-
ids.

Wipe over the surfaces gently. Be careful that 
you do not scratch the surfaces.

Do not use any liquid cleaning agents for 
cleaning the lens, to avoid damaging the coat-
ing film on the lens.

This procedure erases all your data that is 
stored on the memory card.

Never pull out the memory card while the 
device is accessing it. This could cause data 
to be damaged or lost.

If an error occurs during the firmware update 
process retry the procedure or contact your 
dealer.

LU Screeneo_EN.book  Page 33  Jeudi, 15. mai 2014  10:45 10