Kathrein 20210198 Data Sheet
22
The following on-screen display appears:
LNB Type:
If your reception system does not have a universal LNB, use the
buttons to select the LNB types
that are used in your reception system. You can choose from the following LNB types:
- Universal
or
- Simple
or
- User-defi ned
Connection and set-up
Satellite Confi guration - Tuner 1
Defi ne the settings for the fi rst satellite for Tuner 1 here.
LNB frequency (MHz):
You only need to specify this data if
your LNB type is not “Universal”. The
data required differs for the settings
“Simple” and “User-defi ned”.
your LNB type is not “Universal”. The
data required differs for the settings
“Simple” and “User-defi ned”.
- Selection “Simple” LNB:
Use the number pad to enter the LNB frequency
- Selection
“User-defi
ned”:
To enter the required low, high and limit frequencies press
the
button. The entry is made using the number pad
Uncommitted Switch
Set the “Uncommitted switches” here to match the confi
guration of your reception system.
You can select “Off” or a value from “1” to “16” in single unit increments.
Refer to the documentation for
your LNB or seek assistance
from a specialist engineer.
your LNB or seek assistance
from a specialist engineer.