Kathrein 20210198 Data Sheet
25
The following on-screen display appears:
Motor control
Select the control type “DiSEqC™1.2”. For
this, refer to the documentation for your
this, refer to the documentation for your
polar antenna.
Go to Null Position
Select the “Go to Null Position” fi eld. Press
the
button to instruct the turntable to
move to its null position.
Set borders
Select the “Set Borders” fi eld. In this menu
you can set the limits for your turntable.
This is particularly necessary if the
turntable has only a restricted range
in which it may turn before striking an
obstruction (such as a wall or tree).
you can set the limits for your turntable.
This is particularly necessary if the
turntable has only a restricted range
in which it may turn before striking an
obstruction (such as a wall or tree).
Press the
button. The following
on-screen display appears:
The following buttons allow you to control the movement of the turntable:
Start slow rotation to “West”
Rotate to “West” step by step
Stop the current movement
Rotate to “East” step by step
Start slow rotation to “East”
Once you have reached the desired “East”/“West” limit, switch to the respective fi eld “Set current position
for “****” border” and press the
button to confi rm.
Polar antenna (DiSEqC™1.2)
Connection and set-up
Refer to the data/documenta-
tion for your polar antenna
or seek assistance from a
specialist engineer.
tion for your polar antenna
or seek assistance from a
specialist engineer.