Megasat 630 T 1500142 Data Sheet

04

05

Unpack the unit and check to make sure that all of the following accessories are included in the packaging.

•  1x Receiver
•  1x Remote control
•  1x User manual
•  2x Batteries (AAA)

1.  CH – Button
2.  CH + Button
3.  Power/Standby Button
4.  Signal Indicator
5.  Power/Standby Indicator 
6.  IR Receiver Window
7.  USB Port

1.  Aerial IN
2.  TV SCART Socket
3.  VCR SCART Socket
4.  AC IN

This STB has been designed and manufactured to satisfy the international safety standards. Please read the 
following safety precautions carefully before operating this receiver.

Main Supply:
Before operating, please check the units operating voltage is 100~240V AC 50/60Hz.

Overload:
Do not overload a wall outlet, extension cord or adapter, neither use damaged power cord or touch it with wet 
hand as this may result in electric shock.

Liquid:
The receiver shall not be exposed to dripping or splashing water, and that no objects filled with liquids, such as 
base, shall be placed on the apparatus.

Ventilation:
Keep the slots on top of the receiver uncover to allow sufficient airflow to the unit. Do not put the receiver on 
soft furnishings or carpets. Do not expose the receiver to direct light or do not place it near a heater or in humid 
conditions. Do not stack other electronic equipments on top of the receiver.

Cleaning:
Plug out the receiver from the wall outlet before cleaning. Clean the receiver by a soft cloth or mild solution of 
washing-up liquid (no solvents).

Connection:
Disconnect the receiver from the mains when you connect it to satellite LNB or disconnect it from LNB. Failure 
would possibly cause damage to the LNB.

Location:
Put the receiver indoor in order to avoid lightening, raining or sunlight.

Uncover:
Do not remove the cover, to reduce the risk of electric shock. Contact qualified and licensed service personnel 
to repair the receiver, or contact your dealer.