Schlegel N/A DMF_A Radio module Connection wire 2.5 - 5.5 V DMF_A Radio module Connection wire 2.5 - 5.5 V DMF_A Data Sheet
Product codes
DMF_A
- subject to alterations -
DUX Schaltgeräte GmbH
Tel.: +49(341)86872-0
Rechtsform: GmbH
Schönbachstraße 93
Fax: +49(341)8629415
Sitz Leipzig, HRB Leipzig 6150, Geschäftsführer: Dipl.-Ing. Frank Podszuweit
D-04299 Leipzig
e-mail: info@dux.de
http://www.dux.de, Sach-Nr.: Datenblatt_S_789-602_080624
DB-01308_AD-00753_DMF_A_090409_E.doc Seite 1 von 1
Data Sheet
Date: 09.04.2009
Contact Block: DMF_A
General Data
Type Reference:
DMF_A
Description:
Transmitter module for wireless pushbutton, battery-free
Approvals:
CE
Protection class:
II (protective insul.)
Operation travel:
6 mm
Max. storage temperature:
-20°C ... 65°C
Max. operating temperature:
+5°C ... 60°C
Mechanical life:
50000
Note
Energy input
EPulse > 0.45mWs,
2.5V <= Umax <= 5.5V
0.001ms <= TPulse <= 11ms
Antenna
Lambda/4-whip antenna mounted
Frequency/Transmission power
868.3 MHz / max. 10 mW EIRP
Data rate
120 kbps
Bandwidth
280 kHz
Modulation type
ASK
Telegram type
RPS type 2, 32 bit ID, 3 telegrams within 25 ms
Min. time between activations
45 ms
Transmission range
300 m in a free field, this range is strongly dependent on surrounding materials
and on position relative to other energy generators or metal surfaces
and on position relative to other energy generators or metal surfaces
Dimensions
approx. 43 x 45 x 29 mm
Humidity
0-93% r.h. non-condensing
Transmitter module:
PTM230 (enocean)
Advantages
:
- no extra power supply necessary in the sender
- no additional wiring and cable routing
- long reach 300 m (in a free field)
- based on EnOcean protocol
- easy programming of receiver
- can be combined with pushbuttons and 2-position selector and key actuators
- in accordance with the directives R&TTE 1999/5EC, 89/336/EC
l
- no additional wiring and cable routing
- long reach 300 m (in a free field)
- based on EnOcean protocol
- easy programming of receiver
- can be combined with pushbuttons and 2-position selector and key actuators
- in accordance with the directives R&TTE 1999/5EC, 89/336/EC
l
Functional Principle:
The required energy for wireless transmission is generated by an electrodynamic power converter from the pushbutton motion.
With the short energy pulse, a telegram is transmitted to the receiver including a 32-bit module ID of the relative pushbutton and its
switching position.
1 input signal is transmitted by the type DMF_A; suitable for all pushbutton heads, 2-position selector heads and key actuators.
With the short energy pulse, a telegram is transmitted to the receiver including a 32-bit module ID of the relative pushbutton and its
switching position.
1 input signal is transmitted by the type DMF_A; suitable for all pushbutton heads, 2-position selector heads and key actuators.