Cisco 48-Port 10/100 Ethernet Switch: PoE SFE2010P-G5 Data Sheet
Product codes
SFE2010P-G5
Data Sheet
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 3 of 5
●
Simple Network Management Protocol (SNMP) versions 1, 2c, and 3 and Remote
Monitoring (RMON) support
●
Fully rack mountable using included rack-mounting hardware
Specifications
Table 1 gives the specifications, package contents, and minimum requirements for the Cisco
SFE2010P 48-Port 10/100 Ethernet Switch.
Table 1.
Specifications for the Cisco SFE2010P 48-Port 10/100 Ethernet Switch: PoE
Specifications
Ports
48 RJ-45 connectors for 10BASE-T/100BASE-TX; two 10BASE-T/100BASETX/1000BASE-
T ports; 2 mini-GBIC ports; console port; auto medium dependent interface (MDI) and MDI
crossover (MDI-X); auto negotiate/manual setting; RPS port for connecting to redundant
power supply unit
T ports; 2 mini-GBIC ports; console port; auto medium dependent interface (MDI) and MDI
crossover (MDI-X); auto negotiate/manual setting; RPS port for connecting to redundant
power supply unit
Buttons
Reset button
Cabling type
Unshielded twisted pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX; UTP
Category 5e or better for 1000BASE-T
Category 5e or better for 1000BASE-T
LEDs
PWR, Fan, Link/Act, PoE, Speed, RPS, Master, Stack ID 1 through 8
Power over Ethernet
●
IEEE 802.3af PoE delivered over any of the forty-eight 10/100 ports
●
Maximum power of 15.4W to a Fast Ethernet port - 360W total available to all Fast Ethernet ports with regular AC power,
280W total available with a redundant power supply unit
Performance
Switching capacity
17.6 Gbps nonblocking
Forwarding capacity
13 mpps (64-byte packets)
Stacking
Stack operation
●
Up to 192 ports in a stack
●
Hot insertion and removal
●
Ring and chain stacking options
●
Master and backup master for resilient stack control
●
Auto-numbering or manual configuration of units in stack
Layer 2
MAC table size
8000
Number of VLANs
256 active VLANs (4096 range)
VLAN
Port-based and 802.1Q tag-based VLANs, protocol-based VLAN, management VLAN,
multicast TV VLAN, PVE, GVRP
multicast TV VLAN, PVE, GVRP
Head-of-line (HOL) blocking
HOL blocking prevention
Layer 3
Layer 3 options
Static routing; classless interdomain routing (CIDR); 60 static routes; IPv4 and IPv6;
forwarding in silicon - wire-speed forwarding of Layer 3 traffic
forwarding in silicon - wire-speed forwarding of Layer 3 traffic
IPv6
IPv6 options
IPv6 over Ethernet, dual stack, IPv6 over IPv4 network with Intra-Site Automatic Tunnel
Addressing Protocol (ISATAP) tunnel, IPv6 neighbor discovery, IPv6 stateless address
configuration, maximum transmission unit (MTU) discovery, WEB, SSL, Telnet, Ping,
Traceroute, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP),
Simple Network Management Protocol (SNMP), RADIUS, ACL, QoS, protocol-based
VLANs
Addressing Protocol (ISATAP) tunnel, IPv6 neighbor discovery, IPv6 stateless address
configuration, maximum transmission unit (MTU) discovery, WEB, SSL, Telnet, Ping,
Traceroute, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP),
Simple Network Management Protocol (SNMP), RADIUS, ACL, QoS, protocol-based
VLANs
Management
Web user interface
Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
SNMP
SNMP versions 1, 2c, and 3 with support for traps
SNMP MIBs
RFC1213 MIB-2, RFC2863 interface MIB, RFC2665 Ether-like MIB, RFC1493 bridge MIB,
RFC2674 extended bridge MIB (P-bridge, Q-bridge), RFC2819 RMON MIB (groups 1, 2, 3,
and 9 only), RFC2737 entity MIB, RFC 2618 RADIUS client MIB, RFC 1215 traps
RFC2674 extended bridge MIB (P-bridge, Q-bridge), RFC2819 RMON MIB (groups 1, 2, 3,
and 9 only), RFC2737 entity MIB, RFC 2618 RADIUS client MIB, RFC 1215 traps