Cliff XLR connector Sleeve plug, right angle pins Number of pins: 3 Black CP30062 1 pc(s) CP30062 Data Sheet
Product codes
CP30062
CLIFF
Cliff Electronic Components Limited,
76 Holmethorpe Avenue, Holmethorpe Ind. Estate,
Redhill, Surrey RH1 2PF U.K.
Tel: +44 (0)1737 771375 Fax: +44 (0)1737 766012
Redhill, Surrey RH1 2PF U.K.
Tel: +44 (0)1737 771375 Fax: +44 (0)1737 766012
www.cliffuk.co.uk
For further information, contact: sales@cliffuk.co.uk
AIRTIGHT XLR
RoHS
The airtight XLR is the latest XLR connector designed and made by Cliff UK.
It is an airtight connector, primarily intended for applications such as active
speakers, where it is detrimental to have air movement in and out of the
enclosure.
The movement of the speaker diaphragm can cause air pressure changes. This
air can produce noise if leaked in and out of the enclosure via any small holes.
A gasket is supplied to seal the socket flange against the enclosure. The gasket
can be fitted on the front or rear of the XLR depending on preferred mounting.
3 mounting types available. Contacts are gold plated.
Rated Current:
It is an airtight connector, primarily intended for applications such as active
speakers, where it is detrimental to have air movement in and out of the
enclosure.
The movement of the speaker diaphragm can cause air pressure changes. This
air can produce noise if leaked in and out of the enclosure via any small holes.
A gasket is supplied to seal the socket flange against the enclosure. The gasket
can be fitted on the front or rear of the XLR depending on preferred mounting.
3 mounting types available. Contacts are gold plated.
Rated Current:
3 Pin 5A. Nominal, 15A. Max.
Rated Voltage:
250VAC Max.
Part Numbers:
CP30060
CP30060
AUDIO CONN AT-XLR-M
(Solder bucket)
CP30070
AUDIO CONN AT-XLR-F
(Solder bucket)
CP30061
AUDIO CONN AT-XLR-M PCB
(Vertical PCB)
CP30071
AUDIO CONN AT-XLR-F PCB
(Vertical PCB)
CP30062
AUDIO CONN AT-XLR-M 90d PCB
(90° PCB)
CP30072
AUDIO CONN AT-XLR-F 90d PCB
(90° PCB)