TP-LINK 54Mbps Pocked-Sized Wirerless Print Server TL-WPS510U Data Sheet

  

31

¾

  Subnet Mask: This option allows you to input subnet mask from the print server. The IP address must 

meet the IP addressing requirements of the network segment. 

¾

  Default Router: This option allows you to input gateway from the print server. This IP address of 

gateway must meet the router or gateway to go across of the network segment. 

¾

  UPnP Settings: To Disable/Enable the UPnP support of this print serve 

1) Click 

Misc, it then appears the sub-menu. 

2) Click 

Factory Default, it can restore the factory default settings to print server. It will erase all 

previous settings. 

 

3) Click 

Firmware Upgrade, it then as shown in the following picture.