TP-LINK 54Mbps Pocked-Sized Wirerless Print Server TL-WPS510U Data Sheet

  

41

Upgrading print server will allow you to upgrade its firmware inside the print server while the newer 
software version of the print server is available from your local dealer. Depending on the different systems 
users might use, this chapter is divided into several Sections; please refer to the following lists for your 
systems. 

)

1)  Before you proceed to upgrade the print server, please ensure that the necessary binary file is located 

on your current working directory. 

2)  Before upgrading the print server, ensure that it is not printing jobs. You have to wait until the print job 

is finished before you can proceed. 

3)  Be careful not to interrupt the file transfer. If the transfer is interrupted, the print server may have to be 

re-initialized by your dealer. 

1)  Ensure binary file is located in the PSAdmin directory. 

2) Run 

PSAdmin from your Windows-based computer. 

3) Click 

the 

Upgrade icon on tool bar. 

1)  Ensure binary file is located in your current working directory. 

2)  At command prompt, and type “tftp –i <print server’s IP address> put mpsXX.bin “. 

3)  Wait for the transfer successful message. 

4) Done. 

1)  Ensure binary file is located in your local drive. 

2)  Enter the IP address of the print server as the URL. Default is 192.168.0.10 

3) Click 

Misc, and then choose Firmware Upgrade. 

4) Click 

Browse… and select the firmware file. 

5) Click 

Firmware Upgrade button. 

6) Done.