Honeywell evohome Wireless indoor thermostat HCW82 Data Sheet
Product codes
HCW82
HCW82
WIRELESS ROOM THERMOSTAT
PRODUCT DATA
FEATURES
• Individual room temperature control. The HCW82 is
communicating with the underfloor heating controller
e.g. HCE80 to keep the room temperature constant
e.g. HCE80 to keep the room temperature constant
• Simple binding operation to reduce installation time
• Local setpoint override because simple analogue
• Local setpoint override because simple analogue
interface. Adjustment +12°C to -12°C.
• Window contact optional connectable wired (HCA30)
• Battery powered or external power supply possible
• Remote access to the radiator controller HR 80 with
• Battery powered or external power supply possible
• Remote access to the radiator controller HR 80 with
HCM200D. The setpoint of the HR80 can be adjusted
with the HCW82 the room temperature sensor of the
HCW82 is used.
with the HCW82 the room temperature sensor of the
HCW82 is used.
• HCW82 used as room thermostat with HCM200D. The
relays HS20/HS30 are switched ON/OFF depending on
the room temperature
the room temperature
• Room temperature control combined with the shading
function for shutter control with HCM200D
GENERAL
The wireless room thermostat HCW82 is used for individual
room temperature control. The HCW82 is communicating with
the underfloor heating controllers HCE80/HCE80R/HCC80/
HCC80R and the Hometronic Manager HCM200D. The
setpoint can be easily adjusted from -12°C to + 12°C
because the user friendly analogue interface. The HCW82
measures the room temperature and sends the value as
offset temperature to the underfloor heating controller e.g.
HCE80 and/or to the HCM200D in order to keep the room
temperature constant.
For energy saving it can also send the status of the window
contact to the HCM200D if it is installed.
room temperature control. The HCW82 is communicating with
the underfloor heating controllers HCE80/HCE80R/HCC80/
HCC80R and the Hometronic Manager HCM200D. The
setpoint can be easily adjusted from -12°C to + 12°C
because the user friendly analogue interface. The HCW82
measures the room temperature and sends the value as
offset temperature to the underfloor heating controller e.g.
HCE80 and/or to the HCM200D in order to keep the room
temperature constant.
For energy saving it can also send the status of the window
contact to the HCM200D if it is installed.
SPECIFICATIONS
ELECTRICAL
Operating Voltage
: With 2 x AAA Alkaline Batteries
(included) or external 3 ± 10%
voltage, min. current 25 mA
(included) or external 3 ± 10%
voltage, min. current 25 mA
RF Communication
RF band
: 868,3 MHz Transmitter
Receiver class :
2
RF communication range : 30m in a residential building
environment
RF communication
: short, high rate transmission to
Technology minimize air time and avoid
collisions
collisions
ENVIRONMENTAL and STANDARDS
Temperature setpoint
range (offset)
range (offset)
: -12 to +12 ºC
Storage temperature
: -20 … +70 ºC
Operating temperature
: 0 … +40 ºC
Temperature sensing
element :
element :
NTC 20 k
Ω
Dimensions (HxWxD)
: 103 x 99x 30 mm
Humidity
: max. 5 … 93 %
IP class
: IP30
Compatible products
: HCE80, HCE80R, HCC80,
HCC80R, HCM200D
Approval :
CE
EN0H0502GE51
R0805