Baco BACO N/A 33E10 1x off/(on) Screw terminals Max 10 A 33E10 1x off/(on) Screw terminals Max 10 A BA33E10 Data Sheet

Product codes

BA33E10

7 / 9

Reeeeffffeeeerence(s)

rence(s)

rence(s) : : : : See

See

See range

range

range sec

sec

section

tion

4. INSTALLATION

INSTALLATION

Control station mounting

Control station mounting ::::

. use base mounting contact blocks

Printed circuit board mounting

Printed circuit board mounting ::::

. use Pin-style contact blocks

Current

Current ssssupply

upply

upply ::::

. On the back side of the block

Visualization of the contact state

Visualization of the contact state::::

. Contact state is visible on the back side of the contact block,
mounted block (colour plunger, visible)

Type

Type of

of wire

wire

wire ::::

   For screw terminal contact blocks (front mounting or base
mounting):
      . Solid or stranded wire without ferrule : 2x 0,5 mm² to 2x 2,5
mm²
      . Solid or stranded wire with ferrule : 2 x 0,5 mm² to 2 x 1,5 mm²

   For plug-in terminal contact blocks:

      . Solid or stranded wire without ferrule : 2x 0,5 mm² to 2x 2,5
mm²
      . Solid or stranded wire with ferrule : 2 x 0,5 mm² to 2 x 1,5 mm²

   For Faston terminal contact blocks :
      . 1 faston clip  6,35 mm or 2  faston clips  2,85 mm

   For pin style terminal contact blocks :
      . Ø 1 mm

Connection with screw and plug

Connection with screw and plug----in terminals

in terminals

in terminals ::::

. Terminals protected against direct contact (IP2X)
. Recommended terminal torque: 1.2 Nm

4. CONNECTION

CONNECTION

Tools

Tools ::::

   . For plug-in terminals, it is advisable to use screwdriver with Flat
blade -  2.5 mm
   . For screw terminals, it is advisable to use screwdriver Phillips
n°2 or screwdriver with flat blade - 5,5 mm
   . To remove the block it is advisable to use a flat blade
screwdriver

Connecti

Connecting

ng blocks on clips

blocks on clips

blocks on clips ::::

Clip

single

positions

1 level

Blocks

2 levels

6 and more NO blocks on a 3 position clip are unsuitable

with

EN418 push and turn mushroom head.

5. TECHNICAL CHARACTERISTICS

TECHNICAL CHARACTERISTICS

Maximum operating current

Maximum operating current::::

   . For standards blocks (screw or Plug-in terminals)
      . AC15 (Alternating current)
         - Ue = 120 V   Ie = 8 A
         - Ue = 230 V   Ie = 6 A
         - Ue = 400 V   Ie = 4,5 A
         - Ue = 440 V   Ie = 3,5 A
         - Ue = 500 V   Ie = 2,5 A
         - Ue = 690 V   Ie = 1 A

      . DC13 (Direct current)
         - Ue = 24 V     Ie = 1,5 A
         - Ue = 48 V     Ie = 1 A
         - Ue = 60 V     Ie = 0,7 A
         - Ue = 110 V   Ie = 0,3 A
         - Ue = 230 V   Ie = 0,2 A

   . For Pin style terminals blocks
      . AC15 (Alternating current)
         - Ue = 120 V   Ie = 8 A
         - Ue = 240 V   Ie = 6 A
         - Ue = 400 V   Ie = 4 A

      . DC13 (Direct current)
         - Ue = 125 V   Ie = 0,22 A
         - Ue = 250 V   Ie = 0,1 A

   . For Faston terminal blocks
      . AC15 (Alternating current)
         - Ue = 120 V   Ie = 6 A
         - Ue = 240 V   Ie = 3 A
      . DC13 (Direct current)
         - Ue = 125 V   Ie = 0,55 A
         - Ue = 250 V   Ie = 0,27 A

Creation date: 22/10/07

Update : 22/10/07