Idec LSED-2PW IDEC YW Serie LSED-2PW Data Sheet
Product codes
LSED-2PW
Innovative Design, Space-Saving, Safety,
and Self-Cleaning Contacts
and Self-Cleaning Contacts
Higher Brightness
The new unibody pilot light achieves high brightness.
Short Depth behind the Panel
Unibody type measures only 42mm depth behind the panel.
Four Lens Shapes
Flush, flush with marking, extended, and dome.
Panel Mounting
Unibody pilot lights can be mounted on panels simply by
tightening the locking ring.
tightening the locking ring.
Unibody Pilot Lights
Satisfy International Standards
• Safety Lock Mechanism
When the emergency stop signal has been generated during actuation of
the emergency stop device, the emergency stop function shall be
maintained until the emergency stop device is reset (disengaged)
(IEC 60947-5-5, 6.2).
the emergency stop device, the emergency stop function shall be
maintained until the emergency stop device is reset (disengaged)
(IEC 60947-5-5, 6.2).
• Direct Opening Action
Even if the contacts are welded, NC contacts are forced to open and break
the circuit (compliant to IEC 60947-5-1, Annex K, IEC 60947-5-5, 5.2).
the circuit (compliant to IEC 60947-5-1, Annex K, IEC 60947-5-5, 5.2).
• Safe Pushbutton Design
The pushbutton is designed to ensure that an object cannot become
trapped between the mushroom button and the panel, disabling the button
operation. In addition, the pushbutton is designed to prevent removal from
the front of the panel (IEC 60947-5-5, 6.3.2).
trapped between the mushroom button and the panel, disabling the button
operation. In addition, the pushbutton is designed to prevent removal from
the front of the panel (IEC 60947-5-5, 6.3.2).
Easy Operation
• Push-to-lock, Pull/Turn-to-release
YW emergency stop switches can be unlatched by
either pulling or turning the operator.
either pulling or turning the operator.
A variety of operations, key removal
positions, and circuits.
positions, and circuits.
Wide range adds more options to choose from.
Emergency Stop Switches
Key Selector Switches
Unlatching by pulling
Unlatching by turning
Plastic Bezel
Non-illuminated
Illuminated
Flush
Dome
Extended
Flush
w/marking
w/marking
Metal Bezel
2
(07/12/13)