Conrad USB Digital Microscope 10x to 200x, 2.0 Megapixel 191341 Data Sheet

 

After clicking ‘Reset picture magnification’, the icon in the upper right corner is 

.

 

 

2. Change the magnification rate and capture several pictures, click on the picture to enter into measurement 

interface. And click ‘

> Set magnification > Set picture magnification’, now a dialog will show up as 

below, enter the magnification rate into the dialog and click ‘OK’.

 

     

 

3. If you want to use the same magnification rate to capture pictures, just click ‘

  > Set magnification > 

Set capture magnification’. Now all pictures will use the same magnification rate and you can start 

measurement directly. 

 

You can draw or add a text on the picture and save for later analysis. 

1.  Click icon 

  to choose any kinds of drawing under the pull-down manual as below.   

                                           

 

                                                                                                                                                                      8