Sony ILCE-7K ILCE7KB Data Sheet

GB

GB

Notes
• If the charge lamp on the camera flashes when the AC Adaptor is connected to the 

wall outlet (wall socket), this indicates that charging is temporarily stopped because 
the temperature is outside the recommended range. When the temperature gets back 
within the appropriate range, the charging resumes. We recommend charging the 
battery pack in an ambient temperature of between 10°C to 30°C (50ºF to 86ºF).

• Connect the AC Adaptor (supplied) to the nearest wall outlet (wall socket). If 

malfunctions occur while using the AC Adaptor, disconnect the plug from the wall 
outlet (wall socket) immediately to disconnect from the power source.

• When the camera is being used for the first time or when you use a battery pack that 

has not been used for a long time, the charge lamp may flash quickly when the 
battery is charged for the first time. If that happens, remove the battery pack from the 
camera and then re-insert it to recharge.

• Do not continuously or repeatedly charge the battery without using it if it is already 

fully charged or close to fully charged. Doing so may cause a deterioration in battery 
performance.

• When charging is finished, disconnect the AC Adaptor from the wall outlet (wall 

socket).

• Be sure to use only genuine Sony brand battery packs, micro USB cable (supplied) 

and AC Adaptor (supplied).

The charge lamp lights orange, and 
charging starts.
• Turn off the camera while charging the 

battery.

• When the charge lamp flashes and 

charging is not finished, remove and re-
insert the battery pack.

Charge lamp
Lit: Charging
Off: Charging finished
Flashing:

Charging error or charging paused 
temporarily because the camera is 
not within the proper temperature 
range