Philips HD3620 HD3620/25P1 Data Sheet

Product codes
HD3620/25P1
Page of 102
Problem
Solution
The beer tastes bad.
Make sure you keep the appliance plugged in all the time. Once the keg 
has been opened and is kept cool, the beer stays fresh for 30 days. Check 
the expiry date on the keg before you install a new keg.
Always clean the tap unit and place a new tube into it when you install a 
new keg.
Make sure you use clean glasses.
cooling
The temperature on the 
display goes up.
Make sure that the doors are properly closed (see chapter ‘Preparing for 
use’, section ‘Placing the keg into the appliance’).
During hot days, put the appliance in a cooler place.
Place the appliance in an environment with an ambient temperature 
between 3°C and 32°C. Leave at least 10cm free space around the 
appliance. Do not expose the appliance to direct sunlight.
Check if the fan outlet at the back of the appliance is free from dust 
and/or other particles.
The appliance does not 
chill the beer sufficiently
At an ambient temperature of 23°C, chilling the keg takes approximately 
12-15 hours.
At higher ambient temperatures, chilling the keg takes longer. When 
you use the appliance above 32°C, the beer temperature may rise 
above 3°C. When the temperature decreases to below 32°C, the beer 
temperature drops to 3°C again.
You can prechill the keg in upright position in the fridge for a while before 
you install the keg.
Keg suppliers
If you need information about the keg or if you have a problem with your 
keg, you can contact the supplier of the keg in your country.You will find 
the phone numbers in the table below.
Country
Brand
Phone number
Web address
The Netherlands
Dommelsch
 0800-0230367
www.dommelsch.nl
Hertog Jan
0800-0230375
www.hertogjan.nl
Jupiler
0800-0230945
www.jupiler.nl
Grolsch
0800-1591
www.grolsch.nl
Bavaria
0900-2282742 (Eur 0,10 p/m)
www.bavaria.nl
Belgium
Stella Artois
070-222918
www.stella-artois.be
Jupiler
070-222912
www.jupiler.be
Leffe
078 250 159
www.perfectdraft.
com
EnglisH
22