Intel E3815 FH8065301567411 Data Sheet
Product codes
FH8065301567411
Intel
®
Atom™ Processor E3800 Product Family
Datasheet
2423
23:16
00h
RO
RECEIVED_PID_STS (RECEIVED_PID_STS_0): The hardware updates
this field with the received PID for transactions in either direction. When the
controller is writing data, this field is updated with the handshake PID that is
received from the device. When the host controller is reading data, this field
is updated with the data packet PID (if the device sent data), or the
handshake PID (if the device NAKs the request). This field is valid when the
hardware clears the GO_DONE#_CNT bit. Reset Default = 0.
this field with the received PID for transactions in either direction. When the
controller is writing data, this field is updated with the handshake PID that is
received from the device. When the host controller is reading data, this field
is updated with the data packet PID (if the device sent data), or the
handshake PID (if the device NAKs the request). This field is valid when the
hardware clears the GO_DONE#_CNT bit. Reset Default = 0.
Power Well: Core
15:8
00h
RW
SEND_PID_CNT (SEND_PID_CNT_0): The hardware sends this PID to
begin the data packet when sending data to USB (ie. WRITE_READ#_CNT is
asserted). Software will typically set this field to either DATA0 or DATA1 PID
values. Reset Default = 0
begin the data packet when sending data to USB (ie. WRITE_READ#_CNT is
asserted). Software will typically set this field to either DATA0 or DATA1 PID
values. Reset Default = 0
Power Well: Core
7:0
00h
RW
TOKEN_PID_CNT (TOKEN_PID_CNT_0): The hardware sends this PID as
the Token PID for each USB transaction. Software will typically set this field
to either IN, OUT or SETUP PID values. Reset Default = 0.
the Token PID for each USB transaction. Software will typically set this field
to either IN, OUT or SETUP PID values. Reset Default = 0.
Power Well: Core
Bit
Range
Default
& Access
Field Name (ID): Description