LG Telephone aria130 User Manual
ʅ
ʅ
ʅ
ʅ
aria
130 - DIGITAL KEY TELEPHONE SYSTEM USER GUIDE
11
CO
Line
Line
Feature
s
Button
Procedures
Range
Press REDIAL button.
Hang up.
Hang up.
A busy or no answer number will be redialed automatically after pre-programmed
time interval while MUTE button is lighting.
When called party answers, lift handset to talk.
time interval while MUTE button is lighting.
When called party answers, lift handset to talk.
When the called party is busy or does not answer the call, the system can automatically redial
the number by pre-programmed time interval.
the number by pre-programmed time interval.
Auto Call Number Redial
Queuing
Button
Procedures
Lift handset or press MON button.
Press busy outside line button or specific line group button.
Pressing CALLBK button, your CALLBK button is lighting and confirmation tone is heard.
Hang up or press MON button.
To answer a queue request,
When the busy CO line or specific line group returns to idle, you hear ring and the
queued line button is flashing.
Lift handset and dial a desired phone number.
When the busy CO line or specific line group returns to idle, you hear ring and the
queued line button is flashing.
Lift handset and dial a desired phone number.
When a CO line is busy, you can request a call back when the CO line is available. As soon as it
becomes idle, you can be the first extension to get the CO line.
becomes idle, you can be the first extension to get the CO line.
Executive/Secretary Transfer
Button
Procedures
When the Executive Station is busy or DND (Do Not Disturb), all calls will go to the
Secretary Station.
The Secretary Station may signal the Executive Station that is in DND by using Call Wait
feature. (Press ✱ key or dial the last digit of the number of Executive station or press the
DSS button to operate Call Wait feature.)
Secretary Station.
The Secretary Station may signal the Executive Station that is in DND by using Call Wait
feature. (Press ✱ key or dial the last digit of the number of Executive station or press the
DSS button to operate Call Wait feature.)
Range
Range
Button
Procedures
Range
Dialing an extension number, and the station is busy.
After hearing ICM busy tone, dial the last digit of the next extension number in the same
10’s group. (ex. If station “712” is busy, dial digit “4” to call station “714”.)
It can be used for CO line call by pressing SPEED button + last digit.
10’s group. (ex. If station “712” is busy, dial digit “4” to call station “714”.)
It can be used for CO line call by pressing SPEED button + last digit.
When an extension is busy, you can make a call to a different station by dialing only the last digit
of new station number.
of new station number.
Step Call
Button
Procedures
Range
Each extension can program up to 100 individual speed dial numbers in the station. The numbers
are entered and stored by the user and it can be recalled at any time.
are entered and stored by the user and it can be recalled at any time.
Speed Dial Numbers
To store station speed numbers,
Press TRANS/PGM button.
Press TRANS/PGM button.
Press SPEED button.
Dial speed number bin.
Dial the phone numbers to be stored.
Press HOLD/SAVE button.
Enter name for Dial by Name. (optional)
Station Speed bin
000~ 099
System Speed bins
2000~3499