LG Telephone aria130 User Manual
ʅ
ʅ
ʅ
ʅ
aria
130 - DIGITAL KEY TELEPHONE SYSTEM USER GUIDE
44
Do Not Disturb (DND)
Lift handset.
Dial 5 5 3
Place the handset.
To cancel Do Not Disturb,
Lift handset.
To cancel Do Not Disturb,
Lift handset.
Dial 5 5 3 or 5 5 9.
Hang up.
Shuttle Call
An extension user engaged in an internal or external call, should
briefly press hook switch to hold a call (‘flash’ the hook switch).
The holding party hears music on hold. (If equipped)
briefly press hook switch to hold a call (‘flash’ the hook switch).
The holding party hears music on hold. (If equipped)
Dial the second number of another internal or external call.
When the second call is connected, the extension user may
alternate the call between holding parties by ‘flashing’ the hook
switch.
Then, you may make a conference by ‘flashing’ the hook switch.
alternate the call between holding parties by ‘flashing’ the hook
switch.
Then, you may make a conference by ‘flashing’ the hook switch.
Universal Night Answer
When hearing an incoming signal on other phone or
night bell, when system is in night ringing mode
Lift handset.
night bell, when system is in night ringing mode
Lift handset.
Dial Universal Night Answer Access Code 2 .
You will be connected to an incoming call if it was programmed as
an Universal Night Answer line.
an Universal Night Answer line.
Paging
Lift handset.
Dial the desired page zone number.
Give your message.
Hang up to complete paging.
Page Zones
Call All zones: # 6
Call All Internal zones: # 7
Internal zone 1 : # 0 1
Internal zone 2 : # 0 2
Call All zones: # 6
Call All Internal zones: # 7
Internal zone 1 : # 0 1
Internal zone 2 : # 0 2
: :
Internal zone 15 : # 1 5 (to maximum zone)
External zone 1 : # 4 1
External zone 2 : # 4 2
External zone 3 : # 4 3
Call all external zones : # 5
External zone 1 : # 4 1
External zone 2 : # 4 2
External zone 3 : # 4 3
Call all external zones : # 5
Meet Me” Paging
When hearing a paging announcement,
Dial # #.
Dial # #.
Returning Call to Host System (FLASH to Line)
If your aria system is connected to another system, you can use this
feature to transfer a call back to an extension on the other system.
(Your installer will tell you if you need this feature.)
While connected to an extension call, ‘flash’ the hook switch.
feature to transfer a call back to an extension on the other system.
(Your installer will tell you if you need this feature.)
While connected to an extension call, ‘flash’ the hook switch.
Dial 5 5 1
Hearing new dial tone from the other system, dial the extension
number on the required system.
When the station answers, (See Screened Transfer) speak or
hang up (See Unscreened Transfer) to transfer the call.
number on the required system.
When the station answers, (See Screened Transfer) speak or
hang up (See Unscreened Transfer) to transfer the call.
Analogue Single Line Telephone User Guide for
aria
Telephone Systems
Single Line
(Analogue)
Telephone
Queuing
If you access a busy line, you may request the system
to place you on hold, until the next line becomes idle.
Lift handset.
to place you on hold, until the next line becomes idle.
Lift handset.
‘Flash’ the hook switch.
Dial ✱ 6 6 .
You will hear confirmation tone when the call is
accepted.
Hang up.
Call Park
While connected to an outside call,
Lift handset.
Lift handset.
‘Flash’ the hook switch.
Dial parking location. 601~610
Hang up.
To retrieve a parked call, dial parking location.
Preselected Messages
You can choose a preselected message to be displayed
on the LCD of the phone calling your station.
Lift handset.
on the LCD of the phone calling your station.
Lift handset.
Dial
5 6 3
(Program Code)
Dial
5 1
Dial the following number to leave your message.
(01~10)
Dial 01 + (Time) LUNCH, RETURN HH:MM
Dial 02 + (Date) ON VACATION, RETURN AT MM:DD
Dial 03 + (Time) OUT OF OFFICE RETURN TIME HH:MM
Dial 04 + (Date) OUT OF OFFICE RETURN MM:DD
Dial 05 OUT OF OFFICE RETURN UNKNOWN
Dial 06 + (External no.) CALL XX.... (17 digits)
Dial 07 + (Extension you can be called) IN OFFICE, STA XXXX
Dial 08 + (Time) IN A MEETING, RETURN TIME HH:MM
Dial 09 AT HOME
Dial 10 AT BRANCH OFFICE
‘Flash’ the hook switch.
Dial 02 + (Date) ON VACATION, RETURN AT MM:DD
Dial 03 + (Time) OUT OF OFFICE RETURN TIME HH:MM
Dial 04 + (Date) OUT OF OFFICE RETURN MM:DD
Dial 05 OUT OF OFFICE RETURN UNKNOWN
Dial 06 + (External no.) CALL XX.... (17 digits)
Dial 07 + (Extension you can be called) IN OFFICE, STA XXXX
Dial 08 + (Time) IN A MEETING, RETURN TIME HH:MM
Dial 09 AT HOME
Dial 10 AT BRANCH OFFICE
‘Flash’ the hook switch.
Hang up.
To erase a pre-selected message, lift handset and
dial
5 6 3
+ 5 1 + #
‘Flash’ the hook switch.
Hang up.
Handset Off-hook Alarm
Should the handset be left off the cradle unattended, for any
length of time, the user will receive a high pitched signal.
To cancel the signal, hang up.
length of time, the user will receive a high pitched signal.
To cancel the signal, hang up.