LG DX630 Owner's Manual

Installing and Composition

15

* Do not disconnect the power cord during the suction/discharge fan in operation. If the power cord is disconnected during the

suction/ discharge fan in operation, it may takes longer to activate the lamp after turning on the power and the lifespan of the
lamp may be shortened. 

Turning on the Projector

Turning off the Projector

1. Connect power cord correctly.

2. Remove the lens cap. If it is left on, it could become deformed due to the heat produced by the

projection lamp.

3. Press the POWER button on the remote control or top cover.

(Green operation indicator flashes if lamp is in start-up cycle.)

● An image will appear after the operation indicator light turns (Green).

● Press the INPUT button on the remote control or the INPUT button on the control panel to select the input signal you want.

1. Press the POWER button on the top cover or remote control.

2. Press the POWER button on the top cover or remote control again to turn off the power.

3. If the operation indicator is flashing orange, in other words the fan is working (10 seconds), do not

disconnect the projector. When the indicator stays orange, remove the power cord.

● If the operation indicator LED is  orange and blinking, the power button on the top cover or on the remote control will not 

operate.

● This projector features the Quick Power On/Off function that allows a user to turn it on and off quickly.

* What is the 

function?

The projector enters into Stanby mode without waiting it is cooled.
If Standby mode continus for a certain amount of time, the projector can operate without cooling when it is turned on.