Hotbrick Dual WAN Firewall VPN 1400/2 User Manual
HotBrick, Tel: 305-398-0888, Fax: 305-398-5966
7 : VPN Configuration
Virtual Private Network (VPN) uses encryption and authentication to create the connection
between two end points (computers or networks). It allows private data to be sent securely
between two end points (computers or networks). It allows private data to be sent securely
over a public network or Internet without the risk of unauthorized access from outside
intruders. VPNs establish a private network that can send data securely between two
networks. We call this creating a “tunnel”. A VPN tunnel connects the two PCs or networks.
intruders. VPNs establish a private network that can send data securely between two
networks. We call this creating a “tunnel”. A VPN tunnel connects the two PCs or networks.
Note: The Dual WAN VPN Firewall uses industry standard IPSec encryption. However, due to the
variations in how manufacturers interpret this standard, many VPN products are not interoperable.
Although the Dual WAN VPN Firewall can interoperate with many other VPN products, it is not
variations in how manufacturers interpret this standard, many VPN products are not interoperable.
Although the Dual WAN VPN Firewall can interoperate with many other VPN products, it is not
possible to provide specific technical support for every other product on the market.
Planning the VPN
When planning your VPN, you must make following choices first.
When planning your VPN, you must make following choices first.
1. If the remote end is a network, the two-endpoint networks must have different LAN IP address ranges. If
the remote endpoint is a single PC running a VPN client, its destination address must be a single IP address,
with a subnet mask of 255.255.255.255
with a subnet mask of 255.255.255.255
2. You can use the Internet Key Exchange (IKE) setup, or Manual Keying that requires you to
specify each phase of the connection. IKE has become the standard for automatic keying.
specify each phase of the connection. IKE has become the standard for automatic keying.
3. Decide what encryption level you are going to use (DES, 3DES or AES)?
The settings you have to make to connect to another HotBrick product are basic.
Some Standard settings that we use for tunnels between our products are SHA1 authentication, AES 128
Some Standard settings that we use for tunnels between our products are SHA1 authentication, AES 128
bits encryption and DH group 2 as hash algorithm. This is a basic setting t hat ensures good speed and
very secure encryption and authentication so your data will be safely transported via the IPSec tunnel.
very secure encryption and authentication so your data will be safely transported via the IPSec tunnel.
There are two basic settings:
Tunnel to HotBrick Unit - This describes how to setup an IPSec tunnel to a HotBrick VPN
401 VPNX2, LB-2 VPN, 1400/2, 800/8 F and HSS 6000.
401 VPNX2, LB-2 VPN, 1400/2, 800/8 F and HSS 6000.
44