Hunter Engineering Heavy-Duty Brochure
High-fl oor-slope conditions and low-ground-clearance vehicles occasionally
require additional approach ramp length. Several options are available.
require additional approach ramp length. Several options are available.
Stage 2 RX Approach Ramp Extensions
✔
RX ramp extension kit –
20-3113-1 (two included)
Adds 17.75" to the length of RX9, RX10 and RX16; or 5" to RX-12
and RX12A when substituted for 20-3112-1. Standard on RXDC.
✔
RX ramp extension kit –
20-3112-1 (two included)
12" extensions for RX10, RX12 and RX16.
Standard on RX-12 and RX12A.
✔
RX ramp extension –
20-2169-1
(includes quick-release pins) –
Adds 40" to length
of RX9, RX10, and RX16; adds 27.25" to RX-12 and RX12A,
or 22.25" to RX-12-PS/IS.
✔
RX ramp extension –
20-2189-1
(includes quick-release pins) –
Adds 50" to length
of RX9, RX10, and RX16; adds 37.25" to RX-12 and RX12A,
or 32.25" to RX-12-PS/IS.
Stage 2 Four-Post Ramp Extension Kit
(Suitable for L451 and L454 models)
✔
Four-post ramp extensions –
20-1365-1
Adds 17.5" to the length of ramps.
✔
Four-post ramp extensions –
20-2033-1
Adds 40" to the length of ramps.
RX10 Long Wheel Stops – 20-2497-1
For use with conventional sensors and low spoilers.
Adds approximately 12" in length.
Adds approximately 12" in length.
Flush-Mount Conversion Kits
Converts surface-mount installations to
flush-mount installations, using current site
requirements.
Converts surface-mount installations to
flush-mount installations, using current site
requirements.
✔
For RX-9 and RX-12 PowerSlide
®
or
Inflation Station models including RXDC
and RX40 –
and RX40 –
20-2103-1
✔
For all other RX-9 and RX-12 models
20-2102-1
20-2102-1
✔
For RX10, RX12A and RX16 models
20-2736-1
20-2736-1
10
Ramps & extensions