Horizon Fuel Cell Technologies Automobile Parts 180-1010 User Manual
5
WARNING!!
Installing the improper FASS Fuel System or installation kit can cause severe engine
damage.
damage.
This installation manual applies to the FASS-150/180-1010@45psi contained in the
same package. The serial number on the installation/owners manual package should
match the serial number on the outside of the box. If it doesn’t, call the factory.
same package. The serial number on the installation/owners manual package should
match the serial number on the outside of the box. If it doesn’t, call the factory.
This FASS-150/180-1010@45psi (180gph):
Recommendation: FASS-150/180-1010@45psi
-
the Dodge Cummins Truck 1994-1998,
with extreme horsepower modifications.
SAFETY GUIDELINES AND WARNINGS!
TIP!
Flush and clean all brass fittings and fuel line free from debris.
WARNING!
SECURE VEHICLE FROM ROLLING!
WARNING!
Use care not to drill into any electrical wires, air lines or other damageable
components when drilling.
components when drilling.
WARNING!
Consult vehicle manufacturer’s instructions concerning the electrical system
before attempting any electrical connections.
before attempting any electrical connections.
CAUTION:
Wear safety glasses when operating power tools such as drills and grinders or
when using a punch or chisel.
when using a punch or chisel.
CAUTION:
Properly secure lines to prevent chaffing.
VERY IMPORTANT: THE RETURN FUEL FITTING LOCATED IN THE BASE OF THE FASS
FUEL SYSTEM SHOULD NOT BE REMOVED. THERE IS A SPECIAL CUT IN THIS FITTING
THAT ASSISTS IN REGULATING PRESSURE. ALSO, DO NOT REMOVE ANY STEEL ALLEN
HEAD FITTINGS. THESE PORTS WERE USED IN THE MACHINING PROCESS.
FUEL SYSTEM SHOULD NOT BE REMOVED. THERE IS A SPECIAL CUT IN THIS FITTING
THAT ASSISTS IN REGULATING PRESSURE. ALSO, DO NOT REMOVE ANY STEEL ALLEN
HEAD FITTINGS. THESE PORTS WERE USED IN THE MACHINING PROCESS.