Wayne 331100-001 Leaflet

REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.

Drain Water

Removal System

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect
yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property dam-
age! Retain instructions for future reference.

Installation Instructions

SYLT40

331100-001 1/04

System Applications

This system pumps waste water up to an existing water drain
and is designed for residential use in:

Laundry trays

Washing machines

Wet bar sinks

Sinks and tubs

Dehumidifiers

Air conditioners

System Benefits

Completely assembled

Economical

Lightweight

Corrosion resistant

Easily installed

Installs above floor

Fully sealed

Fully automatic

Compact

Suds proof

Installation and Hook Up

1. Connect pipe leading from system to discharge pipe

(Depending on the installation, a coupling or reducer may
be necessary).

2. Apply soapy water to seal in system lid and insert vent

through seal.

3. Verify pipe is inserted 2 inches into lid opening.

Figure 1 - Pump and Housing

Specifications

Sump Pump
Information

Basin Size

Inlet

Discharge

Vent

Weight

Check Valve

4/10 HP

10 Gallon w/ sealed lid

1-1/2”

28 lbs.

Included

UL Listed

17” x 11” x 14”

Fully Automatic

4. Test operational cycle. (To prolong the life expectancy of

this system, flush with tap water every three months.

This pump is not designed for use in
septic tanks or underground vaults to

handle raw sewage or effluents. Never use this unit in haz-
ardous or explosive locations.

WARNING

Figure 2 - Installation with Sink or Laundry Tub

Figure 3 - Installation with Air Conditioner or
Dehumidifier