Fuji Bikes Cyber-Relax AS-888 User Manual

Assembly (Back-rest)

Assembly/Folding

Raise the back rest in the arrow direction and
confirm that the stopper (enlarged view in the
circle) is locked. (You will hear a click.)

Hold down the stopper located under the back rest
(enlarged view in the circle) in the arrow direction
and slowly bring down forward the back rest.
* Take care not allow it falling down suddenly.

Do not insert hands or fingers
between the arm rest and the back
rest when moving the back rest.

Do not touch any section other
than the section in the circle
when operating the stopper.

Use of back pad and pillow

Attach the back pad using the fastener on the back rest. Attach the pillow using the magic tape on the

back rest.

1. Install the back pad.

2. Install the pillow.

•  Turn down the pillow backward before starting the massage.
•  If you feel the massaging too hard, return the pillow to the normal position.
•  When you do not use the massaging, you can use it as a reclining chair with the back pad and the

pillow attached at the specified positions.

Always confirm before use that the cloth cover over the back rest is not broken by lifting
the back pad. Confirm also other sections of the cloth are not broken.
(If any breakage is discovered regardless how tiny it is, stop the use immediately,
disconnect the power cord plug and consult your dealer for repair.)
Using the chair without mending the breakage could cause injury or electrical shock.

CAUTION

Released

Stopper

Fixed

WARNING

Magic tape

Pillow

Back pad

Fastener

Back pad