Nortel Networks Nortel Passport 4400 User Manual
Configuring an MPANL over a dedicated line 17
Passport 4400 and 6400 Quick Start Guide 6.0S1
From the 6400
Check all cabling . Ensure all cables are correct for the interface type and
mode.
mode.
Check the Passport patch panel connections.
Use the following commands to check the operational state of the MPANL
service:
service:
> d lp/5 v35/1
Unlocked and enabled.
> d mpanl/51 sig
Unlocked and enabled.
> d mpanl/51 framer
Unlocked and enabled;
Verify frames are being sent to/from the interface.
Verify frames are being sent to/from the interface.
> d mpanl/51 sigm
Unlocked and enabled;
dteComponentName - “MPA_1”;
currentState - informationTransfer.
dteComponentName - “MPA_1”;
currentState - informationTransfer.
>d mapanl/51 prefixDna/*
Verify the 4400 PrefixDna is listed.
>d lp/5 v35/1
Verify linespeed is set to “64000” b/s and the mode is set to DCE.