Behringer Shark FBQ100 User Manual

SHARK FBQ100 User Manual

With the available rackmount (optional) you have the possibility to place five 

SHARKs on two units of space in your rack.

To mount the SHARKs on the rackmount you should use the supplied screws 

(type M3). You need two screws to fix one FBQ100 onto the rackmount. In the 

bottom of your SHARK you will find two little threads. You have to position the 

single SHARKs on the rackmount, so that the threads correspond to the cutouts 

of the rackmount (see fig. 5.1). Now you can fix the FBQ100 onto the rackmount. 

Just take a cross-point screwdriver and tighten both screws loosely. After you 

have fixed all SHARKs on the rackmount, you can adjust the devices and tighten 

all screws solidly.

Bottom FBQ100

Thread 1

Cutout 1

Cutout 2

Front Rackmount (Bottom View)

Thread 2

Fig. 5.1: Installation of the FBQ100 on the available rackmount (optional)

You will need 2 units of space for the FBQ100 rackmount. For technical reasons a 

little gap remains above the rackmount.