Behringer Virtualizer 3D FX2000 User Manual

VIRTUALIZER 3D FX2000 User Manual

In order to generate an extremely natural reverberation, we at BEHRINGER 

have developed new kinds of algorithms for virtual acoustics. These algorithms 

will help you calculate all room and reverberation parameters with absolutely 

professional quality and naturalness. 
In spite of this extensive and calculation-intensive work performed by the 

24-bit processor in the FX2000, the VIRTUALIZER 3D is very easy to handle. 

Changing parameters to achieve a specific sound is simple.  There are 100 presets 

available to store your own programs.
The FX2000 includes excellent reverb and delay programs, but that’s not all. 

Besides the classic plate reverb simulations, the VIRTUALIZER 3D will impress 

you with its excellent modulation effects (like chorus, flanger and phaser), 

which were extended to include special variations like a musical pitch shifter, 

a tremolo, and a rotary speaker simulation. The FX2000’s dynamic and psycho-

acoustic effects allow you to do without a number of additional pieces of 

equipment. The FX2000 also offers you a series of distortion and amplification 

sounds that are combined with a speaker simulation. Thus, as a guitarist in 

recording situations, you can achieve an excellent sound on tape or hard disk, 

even without a speaker cabinet. Besides its logical and simple operation, 

the VIRTUALIZER 3D’s technical equipment is also impressive. The following 

points ensure signal processing at a professional level:

Extremely low-noise and exact 24-bit A/D and D/A converters.

A professional sample rate of 46 kHz guarantees a high signal resolution for 

a frequency response of 20 Hz to 20 kHz.

The 24-bit processor features dual engine software; these two sections 

process audio input independently.

As for all BEHRINGER products, the highest quality components and controls 

are used.

BEHRINGER uses an uncompromising selection of components. The heart of the 

BEHRINGER VIRTUALIZER 3D is a 24-bit DSP, which, due to its exceptional technical 

specifications, is regarded as one of the finest building blocks. With it come the 

first class 24-bit A/D-D/A converters, guaranteeing a precise conversion of audio 

signals. Narrow-range tolerance resistances and capacitors, high-grade switches, 

and other selected components are all very high in quality.
The VIRTUALIZER 3D was manufactured on the basis of SMD technology 

(Surface Mounted Device). The use of sub-miniature building blocks known from 

space flights allows not only an extreme packing density but also ensures an 

increased dependability. The FX2000 was manufactured under ISO9000 certified 

management system.

The VIRTUALIZER 3D was carefully packed in the factory to ensure safe transport. 

Nevertheless, if the box shows signs of damage, please check the equipment 

immediately for any signs of external damage.

The BEHRINGER VIRTUALIZER 3D requires one standard 19" rack unit of space 

(1 3/4"). Please leave an additional 4" installation depth to allow connections at 

the rear side.
Make sure that there is adequate ventilation and do not place the VIRTUALIZER 3D 

on top of an amplifier, which could cause overheating.

The fuse holder on the female mains connector has 3 triangular markings, 

with two of these triangles opposing each other. The VIRTUALIZER 3D is set to 

the operating voltage printed next to these markers and can be set to another 

voltage by turning the fuse holder by 180°. CAUTION: This instruction 

120-V operation!
Connection to the mains is made by a mains cable with an IEC receptacle that 

complies with the required safety regulations.

The BEHRINGER VIRTUALIZER 3D is equipped with electronically servo-balanced 

inputs and outputs. The circuit design features automatic hum suppression for 

balanced signals and thus ensures trouble-free operation, even at the highest 

operating levels. Externally induced mains hum, etc. can therefore be effectively 

suppressed. The automatic servo-function recognizes the presence of unbalanced 

connectors and adjusts the nominal level internally to avoid level differences 

between the input and output signals (6-dB correction).
The MIDI connectors (IN/OUT/THRU) are standard DIN plug connections. The data 

communication is isolated from ground by opto-couplers.

Please register your new BEHRINGER equipment right after your purchase 

by visiting http://behringer.com and read the terms and conditions of our 

warranty carefully. 
Should your BEHRINGER product malfunction, it is our intention to have it 

repaired as quickly as possible. To arrange for warranty service, please contact 

the BEHRINGER retailer from whom the equipment was purchased. Should your 

BEHRINGER dealer not be located in your vicinity, you may directly contact 

one of our subsidiaries. Corresponding contact information is included in the 

original equipment packaging (Global Contact Information/European Contact 

Information). Should your country not be listed, please contact the distributor 

nearest you. A list of distributors can be found in the support area of our website 

(http://behringer.com). 
Registering your purchase and equipment with us helps us process your repair 

claims more quickly and efficiently. 

Thank you for your cooperation!